M101B Tablet PC Quick Start Guide Please read these instructions carefully before using this product, and save this manual for future use.
Getting Started Congratulations on purchasing this rugged Tablet Computer. The rugged design allows you to use it in harsh outdoor environments. This quick start guide tells you step by step how to get the Tablet Computer up and running.
Description Of Parts Front: No 1 2 Item Front Camera LED Indicators: RF HDD Battery Power 3 Touch Screen 4 Fn1 Button 5 6 Menu Button Power Button Right: Description No Item Description 2 Megapixel Webcam I/O Cover Protects I/O ports 7 Show the current status of Micro HDMI HDMI output to external 8 the Tablet Computer display Green - WiFi/BT/3G/GPS LAN/RS232 Adapter port for 9 ON LAN/RS232 connector No light - None of USB 3.
Rear: No 15 16 Item Kensington Lock Port Optional Barcode 17 Optional RFID 18 Rear Camera 19 Camera Flash 20 Expansion Port 21 Fn2 Button 22 Volume Buttons 23 Battery Lock Latch 24 Battery Release Slider Touch Pen Slot 25 26 3G Module/SIM card slot 27 Speakers Bottom: Description Provides lock access for Kensington Lock. Barcode Scanner for reading of 1D/2D barcode. RFID reader for reading of RFID tags. 5MP Autofocus Camera. Captures photos and videos.
Combination Keys (Keyboard Key Emulation) For the physical buttons on the M101B tablet computer, in addition to their dedicated functions detailed in the previous section, they can also be used to emulate commonly used keyboard key strokes.
First-time Operation Insert SIM card (For Optional 3G/LTE equipped device) The Tablet Computer supports data connection using 3G/LTE SIM cards and fits a Micro-SIM card. (Note: 3G/LTE feature is optional). Perform the following to install the SIM card into your Tablet Computer: 1. Remove the service window in the rear by unscrewing the four screws. 2. Remove the screw that is securing the 3G/LTE module. 3. Carefully lift the 3G wireless module up, and be careful not to damage the connected cable. 4.
6. Make sure the battery is completely lowered into the compartment before letting go of the Battery Release Slider. Battery will be flat against the housing once fully inserted Removing the Battery Pack 1. Shut down the tablet computer (or put it to sleep). Disconnect any cords connected to the computer. 2. Turn the tablet computer over, back facing up. 3. Locate the Battery Lock Latch and push it to the “Unlocked” position. 4. Locate the Battery Release Slider that is spring-loaded. Pull back and hold.
When the AC Adapter is connected, the battery pack starts charging. The battery LED indicator on the tablet computer will show different states. Please refer to description of the LED indicator in the Description of Parts. Turning On / Off Turning On Press and hold the power switch for 3 seconds until the blue LED power indicator light is lit up. Note: Do not press the power switch repeatedly.
Setting up Windows on your computer for the first time When setting up Windows for the first time on your computer, the procedures vary on the different versions of Windows. Some versions of Windows require entry of a product key. Refer to the following table for product key entry: Windows Versions Require Entry of Product Key? Windows Embedded Standard 7 (WS7P) No Windows 7 Professional Yes Windows 7 Ultimate Yes Windows Embedded 8 Standard No Windows Embedded 8.
Vehicle Docking (Optional) Features Holds the tablet securely in a moving vehicle Easy to remove / insert with one hand VESA mount for various standard fixtures USB (x2) on docking for quick access Anti-theft design with security lock Lockable terminal block connector for 9-36V DC input Dimensions M101B Quick Start Guide 9
*All dimensions in millimeters Description of Parts 10 M101B Quick Start Guide
First Time Operation Driver installation For the tablet to work with the vehicle docking, the driver of the vehicle docking has to be installed first. The vehicle docking driver is not pre-installed on the tablet. For a detailed installation guide, please refer to the CD that is included with the package. OR visit winmate official site’s download center to download the latest driver: http://www.winmate.com.
Remove Tablet 1. Reach for the latch on the back of the tablet and pull it sideways. 2. The top hook should be released after the latch is pulled. 3. Tilt the tablet slightly forward first, and then pull the tablet straight up to remove it. Powering the Vehicle Docking The vehicle docking’s input/output expansion functions will only work if power is connected to it. The vehicle docking is designed to be powered via its terminal block input. There are two ways of powering the terminal block input: 1.
Desk Docking (Optional) Features Designed to fit M101B 19V DC IN LAN, RS232, USB x 4, VGA expansion Optional WPR support (9-36V) Dimensions *All dimensions in millimeters M101B Quick Start Guide 13
Description of Parts 1. 2. 3. 4. 5. 6. 19 DC IN 9-36V DC IN (optional) USB 2.0 x 2 LAN (10/100) VGA output RS232 First Time Operation Driver installation For the tablet to work with the desk docking, the driver for the desk docking has to be installed first. The desk docking driver is not pre-installed on the tablet. For a detail installation guide, please refer to the CD that is included with the package OR visit winmate official site’s download center to download the latest driver: http://www.winmate.
Remove Tablet 1. Remove the tablet by lifting the tablet straight up from the desk docking. Powering the Desk Docking The desk docking’s input/output expansion functions will only work if power is connected to it. The desk docking is designed to be powered via its 19V 2.5 Ø DC input. There are two ways of powering the desk docking: 1. Use the power adapter that is included with the tablet as the desk docking does not come with a separate power adapter. 2.
