IV70 Motherboard PGA988 Mini-ITX Fan SBC w/ Intel® 3rd Generation Core™i7/i5 Processor, VGA/ LVDS/DVI/HDMI, Dual LAN, 4xUSB 3.0, PCIe x16 USER MANUAL Version 1.0 WinMate Communication INC.
FCC Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions： This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class "a" digital device, pursuant to part 15 of the FCC rules.
Copyright Notice ALL RIGHTS RESERVED. No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer We.
Packing List Before using this Motherboard, please make sure that all the items listed below are present in your package： IV70 Motherboard IV70 SBC User Manual HDD SATA Cable User’s Manual & Driver CD If any of these items are missing or damaged, contact your distributor or sales representative immediately.
Safety and Warranty 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Please read these safety instructions carefully. Please keep this user's manual for later reference. Please disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible. Keep this equipment away from humidity.
Revision History Version 1.0 Date 2012.12.
Contents CHAPTER 1 1.1 1.2 1.3 1.4 1.5 CHAPTER 2 GENERAL INFORMATION .......................................1 INTRODUCTION ............................................................................... 1 FEATURE ......................................................................................... 1 MOTHERBOARD SPECIFICATIONS .................................................... 2 FUNCTION BLOCK ........................................................................... 3 BOARD DIMENSIONS..............
CHAPTER General Information 1 This chapter includes IV70 Motherboard background information.
Chapter 1 1.1 General Information Introduction IV70 SBC is equipped with Intel HM76 Chipset which designed with Intel’s mobile platform. Intel’s HM76 platform delivers the performance and high scalability cutting-edge embedded computing application. In peripheral connectivity, IV70 SBC with one PCIE x 16 and three Mini-PCIE slot(one for SATA SSD), two SATA connectors(one SATAIII), and eight Hi-Speed USB connectors.(four USB3.
1.3 Motherboard Specifications CPU Type CPU Socket Chipset BIOS VGA DVI/HDMI LVDS LAN Memory Type Super I/O Keyboard/Mouse Sound USB Edge Connectors On Board Pin-Header Connectors Power Connector Expansion Slots Form Factor Dimensions Mechanical & environmental Intel® Core i5-3320M/ i5-3360M/ i7-3520M Socket G2 (PGA988B) Intel® 7 series Chipset (HM76) AMI UEFI BIOS Analog monitor resolution up to 2048 x 1536 @75Hz HDMI/DVI interface, support max.
1.
1.
CHAPTER Installations 2 This chapter provides information on how to use the jumps and connectors on IV70 Motherboard.
Chapter 2 Installations 2.1 Memory Module（SODIMM）Installation The IV70 Motherboard provides two 204-pin SODIMM slot. The socket supports up to 16GB DDR3 1333/1600 SDRAM. When installing the Memory device, please follow the steps below： Step.1. Firmly insert the SODIMM at an angle into its slot. Align the SODIMM on the slot such that the notch on the SODIMM matches the break on the slot. Step.2.
and Mouse. In other cases, especially in embedded applications, a mouse is not used. Therefore, the BIOS standard setup menu allows you to select* “All, But Keyboard” under the “Halt On”. This allows no-keyboard operation in embedded system applications without the system halting under POST. 2.2.3 Serial COM ports Three RS-232 connectors build in the rear I/O. Fourth optional COM ports support RS-232.
2.3 Jumpers and Connectors TOP COM4 DC Jack PS/2 COM3 SODIMM2 SODIMM1 LAN1 COM1 VGA LAN2 USB3.
2.4 Jumper Setting A pair of needle-nose pliers may be helpful when working with jumpers. If you have any doubts about the best hardware configuration for your application, contact your local distributor or sales representative before you make any changes. Generally, you simply need a standard cable to make most connections. The jumper setting diagram is as below. If a jumper shorts pin 1 and pin 2, the setting diagram is shown as the right one.
2.4.1 JP1: RS232 / RS422 / RS485 Selector The jumper can be configured to operate COM1 in RS-232/422/485 mode. And the setting must be cooperated with JP2 settings. RS232 RS422/485 1 3 1 3 4 6 4 6 7 9 7 9 10 12 10 RS232 1-2 4-5 7-8 10-11 12 RS422/485 2-3 5-6 8-9 11-12 JP2 : COM1 RS232 / RS422 / RS485 Function Selector The jumper can be configured to operate COM1 in RS-232/422/485 mode. And the setting must be cooperated with the JP1 settings. Default 1 short 2.
2.4.5 JP8 : Back Light PWR 2.4.6 JP9 : PWM Level 2.4.7 JP10: LCD Panel Voltage Select JP10 can be configured to operate in 3.3Volts / 5Volts / 12Volts mode. 3.3Volts 5Volts 12Volts 1 2 1 2 1 2 3 4 3 4 3 4 5 6 5 6 5 6 IV70 Motherboard User Manual Pin No. 1 Short 2 3 Short 4 5 Short 6 11 Functions 3.
2.5 Connectors and Pin Assignment The table below lists the function of each of the board’s connectors. Label Function Note CON1 DF13-40DP-1.25V 3x1 header, pitch 2.54mm INVERTER LVDS LCD Output Connector Digital Panel Backlight Brightness Control Inverter Connecter COM2/5/6 Serial port COM2/5/6 5x2 header, pitch 2.0mm USB1/2 USB PIN HEADER 4x2 header, pitch2.0mm CPUFAN FAN CONNECTOR 3x1 Pin Header NBFAN FAN CONNECTOR 3x1 Pin Header PANEL System Function Connector 5x2 header ,pitch 2.
2.5.1 CON1: LVDS Connector Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 SYMBOL LCDVDD LCDVDD LCDVDD GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND Pin No. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 SYMBOL LVDS_TXL0N LVDS_ TXL0P LVDS_ TXL1N LVDS_ TXL1P LVDS_ TXL2N LVDS_ TXL2P LVDS_TXLCKN LVDS_ TXLCKP LVDS_ TXL3N LVDS_ TXL3P LVDS_TXU0N LVDS_ TXU0P LVDS_ TXU1N LVDS_ TXU1P LVDS_ TXU2N LVDS_ TXU2P LVDS_TXUCKN LVDS_TXUCKP LVDS_TXU3N LVDS_TXU3P 2.5.
2.5.4 PSKBM1: PS2 Keyboard/Mouse Connector PS/2 Keyboard Pin No. SYMBOL 1 KDATA 2 NC1 3 Ground 4 VCC 5 KBCLK 6 NC2 PS/2 Mouse Pin No. SYMBOL 7 MDATA 8 NC3 9 Ground 10 VCC 15 MSCLK 16 NC4 2.5.5 D-SUB Dual Output The serial port COM1, which is option for RS232 / RS422 / RS485, is the Winbond I/O serial port. COM1 C1 Up: 9(Male) C6 V1 V6 V11 Down: 15(Female) VGA Pin No.
2.5.6 CN11/12/14: Serial port COM6/5/2 The serial ports, which are Winbond I/O support, is RS232 only. 10 8 6 4 2 9 7 5 3 1 Pin 10 8 6 4 2 SYMBOL GND NRI1A NCTS1A NRTS1A NDSR1A Pin 9 7 5 3 1 SYMBOL GND NDTR1A NTXD1A NRXD1A NDCD1A 2.5.7 D-SUB Dual Serial Port The serial port COM3/4, RS232 only, from A1 to A9 is COM3, and B1 to B9 is COM4, which is supported by Fintek. COM4 Pin No.
2.5.9 USB: USB PIN HEADER 2 1 4 3 6 5 8 7 USB1/2 Pin SYMBOL Pin SYMBOL 2 USBVCC 1 USBVCC 4 USB_DATA13 USB_DATA06 USB_DATA1+ 5 USB_DATA0+ 8 GND 7 GND 2.5.10 FAN1_NB/FAN2_CPU: FAN CONNECTOR FAN1_NB FAN2_CPU 2.5.11 PANEL: Front Panel System Function Connector 2 4 6 8 10 Pin 2 4 6 8 10 1 3 5 7 9 SYMBOL HD_LED+ HD_LEDRT_BT1 RT_BT2 5VSB Pin 1 3 5 7 9 SYMBOL PW_LED+ PW_LEDPW_BT1 PW_BT2 RSEV 2.5.
2.5.13 5V/12V/HDD PWR: External Power Yellow Red 5V 12V HDD PWR 2.5.14 PWIN1: DC Jack ( +12V) / Input 2.5.15 ATX_PWR / Input: 12V DC Connector Pin 1 2 3 4 SYMBOL Ground Ground +12V +12V 2.5.
2.5.18 : CN22:SIM card connector CN22 Pin Number 1 2 3 4 5 6 Signal Name VREG_USIM MSM_USIM_RESET MSM_USIM_CLK GND MSM_USIM_VPP MSM_USIM_DATA 2.5.
: CN2: Half Size Mini-PCIE slot Pin Number Signal Name Pin Number Signal Name 2 VCC3_MINIPCIE1 1 PCIE_WAKE# 4 GND 3 NA 6 +V1.5S 5 NA 8 VREG_USIM 7 CLK_SLOT4_OE# 10 NA 9 GND 12 NA 11 CLK_PCIE_SLOT4_N 14 NA 13 CLK_PCIE_SLOT4_P 16 NA 15 GND 18 GND 17 NA 20 WLAN-RFON2 19 NA 22 BUF_PLT_RST2# 21 GND 24 +V3.3A 23 PCIE_RXN3_SLOT4 26 GND 25 PCIE_RXP3_SLOT4 28 +V1.
2.5.20 : CN3: Full Size 3.5G Module Pin Number Signal Name Pin Number Signal Name 2 VCC3_MINIPCIE1 1 PCIE_WAKE# 4 GND 3 NA 6 +V1.5S 5 NA 8 VREG_USIM 7 CLK_SLOT3_OE# 10 MSM_USIM_DATA 9 GND 12 MSM_USIM_CLK 11 CLK_PCIE_SLOT3_N 14 MSM_USIM_RESET 13 CLK_PCIE_SLOT3_P 16 MSM_USIM_VPP 15 GND 18 GND 17 NA 20 WLAN-RFON1 19 NA 22 BUF_PLT_RST2# 21 GND 24 +V3.3A 23 PCIE_RXN3_SLOT3 26 GND 25 PCIE_RXP3_SLOT3 28 +V1.
CHAPTER 3 Graphic Driver Installation This chapter offers information on the chipset software Installation utility Installation of Graphic Driver Panel Resolution Setting IV70 Motherboard User Manual 21
Chapter 3 Graphic Driver Installation 3.1 Standard CMOS Feature ID30 Motherboard is equipped with Intel NM10 Companion Device. The Intel Graphic Drivers should be installed first, and it will enable “Video Controller (VGA compatible). Follow the instructions below to complete the installation. You will quickly complete the installation. Step.1. Insert the CD that comes with the Motherboard. Open the file document “Graphic Driver “. Step.2. Click on “setup” to execute the setup.
Step.3. Click on “Next “ to install Driver. Step.4. Click on “Yes “ to agree License.
Step.5. Click on “Next “ to install Driver. Step.6. Click on “Next “ to install Driver.
Step.7. Click on “Yes, I want to restart this computer now“ to go on.
3.2 Panel Resolution Setting Step.1. Right-click the desktop, and then click Properties. Step.2. In the Display Properties dialog box, click the Settings tab. Step.3. Click on “Monitor”.
Step.4. Click on “Hide modes that this monitor cannot display” to remove this option. Step.5. Click on “Setting”, then could choose 32bit color qualify.
CHAPTER 4 Chipset Driver Installation This chapter offers information on the chipset software Installation utility Installation of Chipset Driver Further information IV70 Motherboard User Manual 28
Chapter 4 Chipset Driver Installation 4.1 Standard CMOS Features Setp.1. Insert the CD that comes with the motherboard. Open the file document “Chipset Driver”. Setp.2. Click on “infinst_auto.exe“ to install driver.
Setp.3. Click on “Yes “ to agree License Setp.4. Click on “Next“ to install driver.
Setp.5. Click on “Next“ to install driver. Step.7. Click on “Yes, I want to restart this computer now“ to go on.
CHAPTER 5 Ethernet Driver Installation This chapter offers information on the Ethernet software installation utility.
Chapter 5 Ethernet Driver Installation Installation of Ethernet Driver The Users must make sure which operating system you are using in the ID30 Motherboard before installing the Ethernet drivers. Follow the steps below to complete the installation of the Broadcom BCM57780 Gigabit Ethernet controller LAN drivers. You will quickly complete the installation. Step.1. Right-click the desktop, and then click Properties. Step.2. In the Other device dialog box, click the Settings tab.
Step.2 Click on “Update Driver” to execute the setup. Step.4. Click on “Browse my computer for driver software“ to install driver.
Step.5. Choose the path to install driver. Setp.6. Click on “Close“ and go on.
CHAPTER 6 Audio Driver Installation This chapter offers information on the Audio software installation utility.
Chapter 6 Audio Driver Installation 6.1 Introduction The ALC888 series are high-performance 7.1+2 Channel High Definition Audio Codecs providing ten DAC channels that simultaneously support 7.1 sound playback, plus 2 channels of independent stereo sound output (multiple streaming) through the front panel stereo outputs. The series integrates two stereo ADCs that can support a stereo microphone, and feature Acoustic Echo Cancellation (AEC), Beam Forming (BF), and Noise Suppression (NS) technology. 6.
Step.2. Click on “Yes“ to install driver. Step.3. Click on “Yes, I want to restart my computer now” to finish installation.
CHAPTER 7 Fintek COM Port Driver Installation This chapter describes the step by step method to install the Fintek COM port driver.
STEP 1.If the system is WIN7 please first do close UAC.(Refer following “Disabling User Account Control (UAC) in Windows 7”) STEP 2.Extract the Patch_0408.zip to a folder. STEP 3.Double-click batch file(patch.bat) will install driver. STEP 4.Check driver install success. Before the update or update fail. After the update and update success. STEP 5.You will need to restart your computer for driver install success. Type in this command from the Run menu: C:\Windows\System32\UserAccountControlSettings.
To turn off UAC, move the slider to the Never notify position, and then click OK. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
To turn UAC back on, move the slider to choose when you want to be notified, and then click OK. If you're prompted for an administrator password or confirmation, type the password or provide confirmation. You will need to restart your computer for UAC to be turned off.
CHAPTER 8 AMI BIOS Installation This chapter describes the different settings available in the AMI BIOS that comes with the board. This chapter offers information on the Award BIOS installation utility.
Chapter 7 7.1 AMI BIOS SETUP Starting Setup Your computer comes with a hardware configuration program called BIOS Setup that allows you to view and set system parameters. The BIOS (Basic Input / Output System) is a layer of software, called ‘firmware’, that translates instructions from software (such as the operating system) into instructions that the computer hardware can understand. The BIOS settings also identify installed devices and establish special features.
The Main BIOS setup screen has two main frames. The left frame displays all the options that can be configured. Grayed-out options cannot be configured; options in blue can be. The right frame displays the key leg- end. Above the key legend is an area reserved for a text message. When an option is selected in the left frame, it is highlighted in white. Often a text message will accompany it.
7.
SETTING DESCRIPTION Above 4G Decoding Enables or Disables 64 bit capable devices to be decoded in above 4G address space PCI Latency Timer Value to be programmed into PCI Latency Timer Register.
PCI Express Settings SETTING DESCRIPTION Relaxed Ordering Enables or Disables PCI Express Device Relaxed Ordering Extended Tag If Enabled allows device to use 8-bit tag field as a requester No Snoop Enables or Disables PCI Express Device No Snoop option Maximum Payload Set maximum payload of PCI express device or allow system BIOS to select the value(128~4096 bytes) Maximum Read Request Set maximum Read Request size of PCI express device or allow system BIOS to select the value(128~4096 bytes)
ACPI Settings SETTING DESCRIPTION Enabled ACPI Auto Enables or Disables BIOS ACPI Auto Configuration. Configuration Enable Hibernation Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may be not effective with some OS. ACPI Sleep State Select the ACPI sleep state the system will enter, when the SUSPEND button is pressed. Lock Legacy Resources Enables or Disables lock of legacy resources.
Trusted Computing Security Device Support Enable or disable BIOS support for security device.
CPU Configuration This section shows the CPU configuration parameters. Hyper-threading Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology). When Disabled, only one thread per enabled core is enabled. Active Processor Cores This field is used to enter the number of cores to enable in each processor package. Limit CPUID Maximum Disabled for Windows XP.
SATA Configuration SATA Devices Configuration. SETTING DESCRIPTION SATA Controller(s) This item allows users to enable or disable the SATA controller(s). SATA Mode Selection This item allows users to select mode of SATA controller(s). SATA Test Mode This item allows users to enable or disable the Test mode. Aggressive LPM Support Enable PCH to aggressively enter link power state.
Thermal Configuration SETTING DESCRIPTION Automatic thermal reporting Configure _CRT,_PSV and _ACO automatically based on values recommended in BWG’s thermal reporting for thermal management settings. Set to disabled for manual configuration. Active trip point 0 fan speed Active trip point 0 fan speed in percentage. Active trip point 1 This value controls the temperature of the ACPI active trip point 1the point in which the OS will turn the processor fan on active trip point1 fan speed.
Intel® Rapid start technology This item allows users to enable or disable Intel rapid start technology. PCH-FW Configuration This item allows users to enable or disable Me FW image re-flash function.
Intel Anti-Theft Technology Configuration Intel® Anti-theft Technology This item allows users to enable or disable Intel AT in bios for testing only. Intel® Anti-theft Technology Rec Set the number of times recovery attemped will be allowed. Acoustic Management Configuration Option to enable or disable automatic acoustic management.
USB Configuration SETTING DESCRIPTION Legacy USB Support Enables support for legacy USB. Auto option disables legacy support if no USB devices are connected. USB3.0 support This item allows user to enable or disable USB3.0 function. XHCI Hand-off This is a workaround for OS without XHCI hand-off support. The XHCI ownership change should claim by XHCI driver. EHCI Hand-off This is a workaround for OS without EHCI hand-off support. The EHCI ownership change should claim by EHCI driver.
SMART Settings Smart Self Test Enable or disable Run SMART Self test on all HDDs during Post F81865 Super IO Configuration Serial Port Configuration Set Parameters of Serial Ports. User can Enable/Disable the serial port and Select an optimal settings for the Super IO Device.
F81865 H/W Monitor Fan1/Fan2 Smart Fan Control This field enables or disables the smart fan feature. At a certain temperature, the fan starts turning. Once the temperature drops to a certain level, it stops turning again. Platform Misc Configuration PCI Express Native Support Enable/Disable. This feature is only available in vista.
Intel Smart Connect Technology Enable/Disable ISCT configuration. Serial Port Console Redirection Console Redirection This item allows users to enable or disable console redirection for Microsoft Windows Emergency Management Services (EMS).
Out-of-Band Mgmt Port Select the port for Microsoft Windows Emergency Management Services (EMS) to allow for remote management of a Windows Server OS. Terminal Type VT-UTF8 is the preferred terminal type for out-of-band management. The next best choice is VT100+ and then VT100. See above, in Console Redirection Settings page, for more Help with Terminal Type/Emulation. Intel ICC SETTING DESCRIPTION Use Watchdog Timer for ICC Enables watchdog timer operation for ICC.
Intel RC Drivers Version Detail IV70 Motherboard User Manual 61
CPU PPM Configuration SETTING DESCRIPTION EIST CPU runs at its default speed if disabled; CPU speed is controlled by the operating system if enabled. Turbo Mode This item allows users to enable or disable turbo mode. Config TDP lock Lock the config TDP control register Long duration power limit Long duration power limit in watts, 0 means use factory default. Long duration maintained Time window which the long duration power is maintained.
Sandybridge DTS Configuration CPU DTS This item allows users to select the ACPI thermal management uses EC reported temperature value function.
7.4 Chipset Setting PCI Express Configuration Detail of PCI Express items. USB Configuration Details of USB items. PCH Azalia Configuration Details of PCH azalia items. High Precision Timer Enables or disables the high precision timer. SLP_S4 Assertion Width This item allows users to set a delay of sorts. Restore AC Power Loss This item allows users to select off, on and last state.
PCI Express Configuration SETTING DESCRIPTION PCI Express Clock Gating Enable or disable PCI Express clock gating for each root port. DMI Link ASPM Control The control of active state power management on both NB side and SB side of the DMI link. DMI Link Extended Synch Control The control of extended synch on SB side of the DMI link. PCIe-USB Glitch W/A PCIe-USB glitch W/A for bad USB device connected behind PCIE/PEG port. Subtractive Decode Enable or disable PCI Express subtractive decode.
USB Configuration XHCI Pre-Boot Driver This item allows user to enable or disable XHCI Pre-boot driver. XHCI Mode This item allows user to enable or disable XHCI Mode. EHCI 1/2 Enables or disables the EHCI controller. USB Ports pre-port Disable Control This item allows users to enable or disable each USB port individually.
PCH Azalia Configuration Azalia This item allows user to enable or disable azalea device. BIOS Security Configuration Enable or disable SMI/BIOS/GPIO/BIOS interface/RTC RAM Lock.
System Agent Bridge Name This item allows users to enable or disable VT-d.
SETTING DESCRIPTION Primary Display This item allows users to select which graphics controller to use as the primary boot device. Internal Graphics This item allows users to enable or disable IGD. GTT Size This item allows users to select GTT size. Aperture Size This item allows users to select aperture size. DVMT Pre-Allocated This item allows users to select DVMT pre-allocated memory size. DVMT Total Gfx Mem This item allows users to select DVMT total memory size.
Memory Information IV70 Motherboard User Manual 70
7.5 Boot SETTING DESCRIPTION Setup Prompt Timeout This item allows you to change number of seconds to wait for setup activation key. Bootup NumLock State This allows you to determine the default state of the numeric keypad. By default, the system boots up with NumLock on wherein the function of the numeric keypad is the number keys. When set to Off, the function of the numeric keypad is the arrow keys. Quiet Boot If this option is set to Disabled, the BIOS display normal POST messages.
CSM parameters SETTING DESCRIPTION Launch CSM This option controls if CSM will be launch. Boot option filter This option controls what devices system can boot to. Launch PXE OpROM Controls the execution of UEFI and legacy PXE OpROM. policy Launch Storage OpROM Controls the execution of UEFI and legacy storage OpROM. policy Launch Video OpROM Controls the execution of UEFI and legacy video OpROM.
7.6 Security This section allows you to configure and improve your system and llows you to set up some system features according to your preference. Administrator Password Set Setup Administrator Password. User Password Set User Password. HDD 0: FUJITSU MHY2 Sets the HDD password.
7.7 Save & Exit Save Changes and Exit Exit system setup after saving the changes. Disacard Changes and Exit Exit system setup without saving any changes. Save Changes and Reset Reset the system after saving the changes. Discard Changes and Reset Reset system setup without saving any changes. Save Changes Save Changes done so far to any of the setup options. Discard Changes Discard Changes done so far to any of the setup options. Restore Defaults Restore/Load Defaults values for all the setup options.
8 Services/ Updates 8.1 IV70 Official website The relevant information about IV70 Products including the latest news and downloads will be presented in the website below: http://www.winmate.com.tw/PanelPc/PPcQuery_tab.asp?Type=B01080119 Please go there to obtain further details of IV70 Products. 8.2 Company information Winmate Communication Inc. 9F, No.111-6, Shin- De Rd,. San- Chung City Taipei 241, Taiwan, R.O.C. Tel: 886-2-8511-0288 Fax: 886-2-8511-0211 Contact us: sales@winmate.com.
