IC70 Motherboard Mini-ITX Fan SBC w/ Intel® Core™ i7/i5/Celeron® Processor, VGA, LVDS, Giga Ethernet, Mini-PCIe and PCIE x 16 slot. USER MANUAL Version 1.0 WinMate Communication INC.
FCC Statement This device complies with part 15 FCC rules. Operation is subject to the following two conditions: This device may not cause harmful interference. This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a class "a" digital device, pursuant to part 15 of the FCC rules.
Copyright Notice ALL RIGHTS RESERVED. No part of this document may be reproduced, copied, translated, or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the prior written permission of the original manufacturer. Trademark Acknowledgement Brand and product names are trademarks or registered trademarks of their respective owners. Disclaimer We.
Packing List Before using this Motherboard, please make sure that all the items listed below are present in your package: IC70 Motherboard IC70 SBC User Manual HDD SATA Cable User’s Manual & Driver CD If any of these items are missing or damaged, contact your distributor or sales representative immediately.
Safety Precautions Warning! Always completely disconnect the power cord from your chassis whenever you work with the hardware. Do not make connections while the power is on. Sensitive electronic components can be damaged by sudden power surges. Only experienced electronic personnel should open the PC chassis. Caution! Always ground yourself to remove any static charge before touching the CPU card. Modern electronic devices are very sensitive to static electric charges.
Safety and Warranty 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 14. 15. Please read these safety instructions carefully. Please keep this user's manual for later reference. Please disconnect this equipment from any AC outlet before cleaning. Do not use liquid or spray detergents for cleaning. Use a damp cloth. For pluggable equipment, the power outlet must be installed near the equipment and must be easily accessible. Keep this equipment away from humidity.
Revision History Version 1.0 Date 2011.07.
Contents CHAPTER 1 GENERAL INFORMATION .....................................1 1.1 1.2 INTRODUCTION ............................................................................ 1 FEATURE ..................................................................................... 1 1.3 MOTHERBOARD SPECIFICATIONS.................................................. 2 1.4 1.5 FUNCTION BLOCK ....................................................................... 3 BOARD DIMENSIONS ..................................
CHAPTER General Information 1 This chapter includes IC70 Motherboard background information.
Chapter 1 1.1 General Information Introduction IC70 SBC is equipped with Intel HM55 Chipset which designed with Intel’s mobile platform. Intel’s HM55 platform delivers the performance and high scalability cutting-edge embedded computing application. In peripheral connectivity, IC70 SBC with one PCIE x 16 and two Mini-PCIE slot, two SATA connectors, and eight Hi-Speed USB connectors.
1.
1.4 Function Block CoreTM i7/i5/Celeron® Processor Mobile CPU SO-DIMM x 2 DDR3 800/1066 Max.
1.
CHAPTER Installations 2 This chapter provides information on how to use the jumps and connectors on IC70 Motherboard.
Chapter 2 Installations 2.1 Memory Module( (SODIMM) )Installation The IC70 Motherboard provides two 204-pin SODIMM slot. The socket supports up to 8GB DDR3 800/1066 SDRAM. When installing the Memory device, please follow the steps below: Step.1. Firmly insert the SODIMM at an angle into its slot. Align the SODIMM on the slot such that the notch on the SODIMM matches the break on the slot. Step.2.
and Mouse. In other cases, especially in embedded applications, a mouse is not used. Therefore, the BIOS standard setup menu allows you to select* “All, But Keyboard” under the “Halt On”. This allows no-keyboard operation in embedded system applications without the system halting under POST. 2.2.3 Serial COM ports Three RS-232 connectors build in the rear I/O. Fourth optional COM ports support RS-232.
2.
2.4 Jumper Setting A pair of needle-nose pliers may be helpful when working with jumpers. If you have any doubts about the best hardware configuration for your application, contact your local distributor or sales representative before you make any changes. Generally, you simply need a standard cable to make most connections. The jumper setting diagram is as below. If a jumper shorts pin 1 and pin 2, the setting diagram is shown as the right one.
2.4.1 JP1: Clear CMOS User must make sure the power supply to turn off the power supply before setting Clear CMOS. Users remember to setting jumper back to Normal before turning on the power supply. Default: 2 short 3. Clear CMOS Normal 1 1 2 2 3 3 Pin No. 1 Short 2 2 Short 3 Functions Clear CMOS Normal JP3 : COM1 RS232 / RS422 / RS485 Function Selector The jumper can be configured to operate COM1 in RS-232/422/485 mode. And the setting must be cooperated with the 2.4.2 settings.
2.5 Connectors and Pin Assignment The table below lists the function of each of the board’s connectors. Label Function Note CON7 DF13-40DP-1.25V 3x1 header, pitch 2.
2.5.1 CN7: LVDS Connector Pin No. 1 3 5 7 9 11 13 15 17 19 21 23 25 27 29 31 33 35 37 39 SYMBOL LCDVDD LCDVDD LCDVDD GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND GND Pin No. 2 4 6 8 10 12 14 16 18 20 22 24 26 28 30 32 34 36 38 40 SYMBOL LVDS_TXL0N LVDS_ TXL0P LVDS_ TXL1N LVDS_ TXL1P LVDS_ TXL2N LVDS_ TXL2P LVDS_TXLCKN LCDS_ TXLCKP LVDS_ TXL3N LVDS_ TXL3P LVDS_TXU0N LVDS_ TXU0P LVDS_ TXU1N LVDS_ TXU1P LVDS_ TXU2N LVDS_ TXU2P LVDS_TXUCKN LVDS_TXUCKP LVDS_TXU3N LVDS_TXU3P 2.5.
2.5.4 PSKBM1: PS2 Keyboard/Mouse Connector Pin No. 1 2 3 4 5 6 PS/2 Keyboard SYMBOL KDATA NC1 Ground VCC KBCLK NC2 Pin No. 7 8 9 10 15 16 PS/2 Mouse SYMBOL MDATA NC3 Ground VCC MSCLK NC4 2.5.5 D-SUB Dual Output The serial port COM1, which is option for RS232 / RS422 / RS485, is the Winbond I/O serial port. COM1 C1 Up: 9(Male) C6 V1 V6 V11 Down: 15(Female) VGA Pin No.
2.5.6 CON3: Serial port COM2 The serial port COM2, which is Winbond I/O support, is RS232 only. 10 8 6 4 2 9 7 5 3 1 Pin 10 8 6 4 2 SYMBOL GND NRI1A NCTS1A NRTS1A NDSR1A Pin 9 7 5 3 1 SYMBOL GND NDTR1A NTXD1A NRXD1A NDCD1A 2.5.7 CON11: Serial port COM5、 、COM6 2.5.8 D-SUB Dual Serial Port The serial port COM3/4, RS232 only, from A1 to A9 is COM3, and B1 to B9 is COM4, which is supported by Fintek. COM4 Pin No.
2.5.9 AUDIO401: Audio Jack ( Pin-header ) Color Blue Green Pink C0~C4 B1~B4 A1~A4 Signal Line In Line Out Microphone In Pin-Header Line in Line out Mic in 2.5.
2.5.11 FAN1_NB/FAN2_CPU: FAN CONNECTOR FAN1_NB FAN2_CPU 2.5.12 PANEL1: Front Panel System Function Connector 2 4 6 8 10 Pin 2 4 6 8 10 1 3 5 7 9 SYMBOL HD_LED+ HD_LEDRT_BT1 RT_BT2 5VSB Pin 1 3 5 7 9 SYMBOL PW_LED+ PW_LEDPW_BT1 PW_BT2 RSEV 2.5.13 J4/J5: Front Audio J4 J5 2.5.14 5V/12V/HDD PWR: External Power Yellow 12V Red 5V HDD PWR 2.5.
2.5.16 ATX_PWR / Input: 12V DC Connector Pin 1 2 3 4 SYMBOL Ground Ground +12V +12V 2.5.17 : CN2: Digital I/O Connector 2 4 6 8 10 1 3 5 7 9 Pin 2 4 6 8 10 SYMBOL Vcc Out1 Out0 IN1 IN0 Pin 1 3 5 7 9 SYMBOL GND Out3 Out2 IN3 IN2 2.5.
2.5.19 : CN2: Half Size Mini-PCIE slot Pin Number Signal Name Pin Number Signal Name 2 VCC3_MINIPCIE1 1 PCIE_WAKE# 4 GND 3 NA 6 +V1.5S 5 NA 8 VREG_USIM 7 CLK_SLOT4_OE# 10 NA 9 GND 12 NA 11 CLK_PCIE_SLOT4_N 14 NA 13 CLK_PCIE_SLOT4_P 16 NA 15 GND 18 GND 17 NA 20 WLAN-RFON2 19 NA 22 BUF_PLT_RST2# 21 GND 24 +V3.3A 23 PCIE_RXN3_SLOT4 26 GND 25 PCIE_RXP3_SLOT4 28 +V1.
2.5.20 : CN3: Full Size 3.5G Module Pin Number Signal Name Pin Number Signal Name 2 VCC3_MINIPCIE1 1 PCIE_WAKE# 4 GND 3 NA 6 +V1.5S 5 NA 8 VREG_USIM 7 CLK_SLOT3_OE# 10 MSM_USIM_DATA 9 GND 12 MSM_USIM_CLK 11 CLK_PCIE_SLOT3_N 14 MSM_USIM_RESET 13 CLK_PCIE_SLOT3_P 16 MSM_USIM_VPP 15 GND 18 GND 17 NA 20 WLAN-RFON1 19 NA 22 BUF_PLT_RST2# 21 GND 24 +V3.3A 23 PCIE_RXN3_SLOT3 26 GND 25 PCIE_RXP3_SLOT3 28 +V1.
CHAPTER 3 Graphic Driver Installation This chapter offers information on the chipset software Installation utility Installation of Graphic Driver Panel Resolution Setting IC70 Motherboard User Manual 20
Chapter 3 Graphic Driver Installation 3.1 Graphic Driver Installation IC70 Motherboard is equipped with Intel GM45 / ICH9M-E Companion Device. The Intel Graphic Drivers should be installed first, and it will enable “Video Controller (VGA compatible). Follow the instructions below to complete the installation. You will quickly complete the installation. Step.1. Insert the CD that comes with the Motherboard. Open the file document “Graphic Driver “. Step.2. Click on “winxp_14428” to execute the setup.
Step.3. Click on “Next “ to install Driver. Step.4. Click on “Next “ to install Driver.
Step.5. Click on “Yes “ to agree License. Step.7. Click on “Yes, I want to restart this computer now“ to go on.
CHAPTER 4 Chipset Driver Installation This chapter offers information on the chipset software Installation utility Installation of Chipset Driver Further information IC70 Motherboard User Manual 24
Chapter 4 Chipset Driver Installation 4.1 Chipset Driver Installation Setp.1. Insert the CD that comes with the motherboard. Open the file document “Chipset Driver”. Setp.2. Click on “Setup“ to install driver.
Setp.3. Click on “Next“ to install driver. Setp.4.
Setp.5. Click on “Next“ to install driver. Step.7. Click on “Yes, I want to restart this computer now“ to go on.
CHAPTER 5 Ethernet Driver Installation This chapter offers information on the Ethernet software installation utility.
Chapter 5 5.1 Ethernet Driver Installation Installation of Ethernet Driver The Users must make sure which operating system you are using in the IC70 Motherboard before installing the Ethernet drivers. Follow the steps below to complete the installation of the Broadcom BCM57780 LAN drivers. You will quickly complete the installation. Step.1. Insert the CD that comes with the motherboard. Open the file document “LAN Driver”. Step.2 Click on “Setup” to execute the setup.
Step.3. Click on “Next“ to install driver. Step.4. Click on “I accept the terms in the license agreement.
Setp.5. Click on “Advanced Network Services“ and go on. Setp.6. Click on “Next“ to install driver.
Setp.7. Click on “Finish“.
CHAPTER 6 Audio Driver Installation This chapter offers information on the Audio software installation utility.
Chapter 6 Audio Driver Installation 6.1 Installation of Audio Driver The users must make sure which operating system you are using in the IC70 Motherboard before installing the Audio drivers. Follow the steps below to complete the installation of the VIA VT1708B Audio drivers. You will quickly complete the installation. Step.1. Insert the CD that comes with the motherboard. Open the file “Audio driver” and click on “Setup” to execute the setup.
Step.2. Click on “Next“ to install driver. Step.3.
Step.4. Click on “Next“ to install driver. Step.5. Click on “Next“ to install driver.
Step.6. Click on “Next“ to install driver. Step.7 Click on “Yes, I want to restart this computer now“ to go on.
Step.9 After restart computer, cliick on “HD ADeck “ to set up Line in/Mic in. Step.10 Select ” Analog to the Line out “ and click “ Next page” Step.11 Select ” Analog to the Line out “ and move the bar.
CHAPTER 7 AMI BIOS Installation This chapter describes the different settings available in the AMI BIOS that comes with the board. This chapter offers information on the Award BIOS installation utility.
Chapter 7 7.1 AMI BIOS SETUP Starting Setup Your computer comes with a hardware configuration program called BIOS Setup that allows you to view and set system parameters. The BIOS (Basic Input / Output System) is a layer of software, called ‘firmware’, that translates instructions from software (such as the operating system) into instructions that the computer hardware can understand. The BIOS settings also identify installed devices and establish special features.
The Main BIOS setup screen has two main frames. The left frame displays all the options that can be configured. Grayed-out options cannot be configured; options in blue can be. The right frame displays the key leg- end. Above the key legend is an area reserved for a text message. When an option is selected in the left frame, it is highlighted in white. Often a text message will accompany it. 7.
PCI Subsystem Settings PCI ROM Priority Selects the PCI Option ROM to launch in case Multiple Option ROMs (Legacy ROM and EFI Compatible ROM) are present.
PCI Latency Timer Use this function to select the number of PCI bus clocks to be used for the PCI latency timer. SETTING DESCRIPTION 32 PCI Bus Clocks Use this setting to program the PCI latency timer to 32 PCI bus clocks. 64 PCI Bus Clocks Use this setting to program the PCI latency timer to 64 PCI bus clocks. 96 PCI Bus Clocks Use this setting to program the PCI latency timer to 96 PCI bus clocks. 128 PCI Bus Clocks Use this setting to program the PCI latency timer to 128 PCI bus clocks.
VGA Palette Snoop VGA Palette Snoop: This filed controls the ability of a primary PCI VGA controller to share a common palette (when a snoop write cycles) with an ISA video card. Enables or Disables VGA Palette Registers Snooping. PERR# Generation Enables or Disables PCI Device to Generate PERR#. SERR# Generation Enables or Disables PCI Device to Generate SERR#. Relaxed Ordering Enables or Disables PCI Express Device Relaxed Ordering.
ASPM Support Set the ASPM Level: Force L0 – Force all links to L0 State AUTO – BIOS auto configure DISABLE – Disables ASPM Extended Synch If ENABLED allows generation of Extended Synchronization patterns.
ACPI Settings Enabled ACPI Auto Configuration Enables or Disables BIOS ACPI Auto Configuration. Enable Hibernation Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may be not effective with some OS. ACPI Sleep State Select the highest ACPI sleep state the system will enter, when the SUSPEND button is pressed.
S5 RTC Wake Settings This function defines the RTC wake-up settings to allow the system to wake up from the S5 (soft off) state. This screen provides functions for specifying the S5 RTC Wake Settings. Wake System with Fixed Time This function allows the system to wake up from S5 state at a specified time.
Wake-Up Hour, Wake-Up Minute, Wake-Up Second This function is used to specify the hour (0-23), the minute (0-59) and the second (0-59) when the system is to wake up from S5 state. Note: This function is available only when the function “Wake System with Fixed Time” is set to Enabled. Wake System with Dynamic Time This function is intended for debugging purposes only.
CPU Configuration This section shows the CPU configuration parameters. Hyper-threading Enabled for Windows XP and Linux (OS optimized for Hyper-Threading Technology) and Disabled for other OS (OS not optimized for Hyper-Threading Technology). When Disabled, only one thread per enabled core is enabled.
Active Processor Cores This field is used to enter the number of cores to enable in each processor package. Limit CPUID Maximum Disabled for Windows XP. Execute Disable Bit XD can prevent certain classes of malicious buffer overflow attacks when combined with a supporting OS (Windows Server 2003 SP1, Windows XP SP2, SuSE Linux 9.2, RedHat Enterprise 3 Update 3.) Hardware Prefetcher Turns on/off the MLC streamer prefetcher. Adjacent Cache Line Prefetch To turn on/off prefetching of adjacent cache lines.
SATA Configuration SATA Devices Configuration. SATA Mode (1) IDE Mode. (2) AHCI Mode. (3) RAID Mode. IDE Mode:This option configures the Serial ATA drives as Parallel ATA storage devices. AHCI Mode:This option allows the Serial ATA devices to use AHCI (Advanced Host ControllerInterface). Serial-ATA Controller Enable / Disable Serial ATA Controller.
Intel IGD SWSCI OpRegion IC70 Motherboard User Manual 52
DVMT/FIXED Memory Select DVMT/FIXED Mode Memory size used by Internal Graphics Device. Options are 128MB, 256MB and Maximum. IGD – Boot Type Select the Video Device which will be activated during POST. This has no effect if external graphics present. Options are VBIOS Default, CRT, LFP, CRT+LFP, EFP and CRT+EFP. LCD Panel Type Selects the LCD panel used by the internal graphics device. ALS Support Enabled or Disabled. Valid only for ACPI. Legacy = ALS Support through the IGD INT10 function.
USB Configuration IC70 Motherboard User Manual 54
Legacy USB Support Enabled-Enables legacy USB. Auto-Disables support for legacy when no USB devices are connected. Disabled-Keeps USB devices available only for EFI applications. EHCI Hand-off This is a workaround for OSes that does not support EHCI hand-off. The EHCI ownership change should be claimed by the EHCI driver. Device Reset Timeout USB mass storage device Start Unit command timeout. Options are: 10 sec / 20 sec / 30 sec / 40 sec.
Super IO Configuration Serial Port Configuration Set Parameters of Serial Ports. User can Enable/Disable the serial port and Select an optimal settings for the Super IO Device.
Serial Port Enables or disables the serial port. Change Settings Selects the IO/IRQ setting of the I/O device.
HW Monitor Fan1/Fan2 Smart Fan Control This field enables or disables the smart fan feature. At a certain temperature, the fan starts turning. Once the temperature drops to a certain level, it stops turning again.
Thermal Configuration IC70 Motherboard User Manual 59
ME SMBus Thermal Reporting Enable/Disable ME SMBus Thermal Reporting Configuration. MCH Temp Read MCH Temperature Read Enable. PCH Temp Read PCH Temperature Read Enable. CPU Energy Read CPU Energy Read Enable. CPU Temp Read CPU Temperature Read Enable. Alert Enable Lock Lock all Alert Enable settings.
7.
Low MMIO Align Low MMIO resources align at 64MB/1024MB. Initiate Graphic Adapter Select which graphics controller to use as the primary boot device. Options are IGD, PCI/IGD, PCI/PEG, PEG/IGD, PEG/PCI and SG. Graphics Turbo IMON Current Graphics turbo IMON current values supported (14-31). VT-d VT-d Enable/Disable. PCI Express Compliance Mode PCI Express Compliance Mode Enable/Disable. PCI Express Port Options are Disabled, Enabled and Auto. IGD Memory IGD Share Memory Size.
South Bridge IC70 Motherboard User Manual 63
SMBus Controller SMBus Controller help. GbE Controller This is constantly enabled. Wake on LAN from S5 Wake on LAN from S5 help. Restore AC Power Loss Options are Power Off, Power On and Last State. SLP_S4 Assertion Stretch Enable Select a minimum assertion width of the SLP_S4# signal. Azalia HD Audio Enables or disables the Azalia HD audio. High Precision Timer Enables or disables the high precision event timer. PCI Express Ports Configuration Enable or Disable the PCI Express Ports in the Chipset.
USB Configuration Enable/Disable All USB Devices, USB 2.0 (EHCI) Support and RMH Support. The setting of AUTO on RMH Support Enable RMH support on Ibex Peak B0 Stepping. All USB Devices Enables or disables all USB devices. EHCI Controller 1 and EHCI Controller 2 These fields are used to enable or disable Enhanced Host Controller Interface (USB 2.0).
7.5 Boot Quiet Boot Enables or disables the quiet boot function. Fast Boot Enables/Disables boot with initialization of a minimal set of devices required to launch active boot option. Has no effect for BBS boot options. Setup Prompt Timeout Number of seconds to wait for setup activation key. 65535(0xFFFF) means indefinite waiting. Bootup NumLock State This allows you to determine the default state of the numeric keypad.
7.6 Security This section allows you to configure and improve your system and llows you to set up some system features according to your preference. Administrator Password Set Setup Administrator Password. User Password Set User Password. HDD 0: FUJITSU MHY2 Sets the HDD password.
7.7 Save & Exit Save Changes and Exit Exit system setup after saving the changes. Disacard Changes and Exit Exit system setup without saving any changes. Save Changes and Reset Reset the system after saving the changes. Discard Changes and Reset Reset system setup without saving any changes. Save Changes Save Changes done so far to any of the setup options. Discard Changes Discard Changes done so far to any of the setup options. Restore Defaults Restore/Load Defaults values for all the setup options.
8 Services/ Updates 8.1 IC70 Official website The relevant information about IC70 Products including the latest news and downloads will be presented in the website below: http://www.winmate.com.tw/BoxPc/EmbeddedSpec.asp?Prod=05_0124&Typeid=B0123010302 Please go there to obtain further details of IC70 Products. 8.2 Company information Winmate Communication Inc. 9F, No.111-6, Shin- De Rd,. San- Chung City Taipei 241, Taiwan, R.O.C. Tel: 886-2-8511-0288 Fax: 886-2-8511-0211 Contact us: sales@winmate.com.