Owner's manual

20140815_rev1
Technical Data Sheet
Toll Free: 877-894-6448 • www.wingits.com • [e-mail]
.5” Cover
Height
Snap-on Cover
Grab Bar
Mounting Flange
Grab Bar Tube
Holes - 1/4”
Slots - 1/4” x 1/2”
(used when installing with
the WINGITS
®
Grab Bar
Fastening System)
Bolt Circle is 2.3125”
Stainless Steel Screws x 6
OPTIONAL HARDWARE
(Sold Separately)
Grab Bar WingIts (GBW40) x 2 Reverse Grab Bar WingIts (SRGBW40) x 2 RES WingIts (RESGBW35) x 2
3”
INCLUDED HARDWARE
Options For Polyester Paint “zz” (Finish): BO = BONE, BI = BISCUIT, ORB = OIL RUBBED BRONZE,
BLKORB = BLACK OIL RUBBED BRONZE, WH = WHITE
WINGIT P/N DIMENSION DESCRIPTION
WGB5YS12zz 12” x 1.25 12” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS16zz 16” x 1.25 16” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS18zz 18” x 1.25 18” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS24zz 24” x 1.25 24” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS30zz 30” x 1.25 30” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS32zz 32” x 1.25 32” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS36zz 36” x 1.25 36” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS42zz 42” x 1.25 42” Polyester Paint Stainless Steel 1.25” OD Grab Bar
WGB5YS48zz 48” x 1.25 48” Polyester Paint Stainless Steel 1.25” OD Grab Bar
Mount with 2 Screws
Top and Bottom
Snap On Flanges
Length
BONE
BISCUIT
WHITE
OIL-RUBBED BRONZE
BLACK
OIL-RUBBED BRONZE