Technical information

ELECTRICAL WIRING LAYOUT
1 Terminal with insulator
2 Generator - clockwise rotation
3 Terminal with insulator
4 Cable, twin core brown & blue
5 Tape
6 Cable, blue
7 Regulator
8 Screw, voltage adjusting
9 Cable, green
10 Cable, red
11 Connector
12 Nipples
13 Cable, twin core, brown & blue
14 Socket, shovel unit
15 Plug, shovel unit
16 Control, shovel unit
17 Clips, brass
18 Solenoid valve
19 Connect cable to solenoid valve plug
as shown, so that the cable falls away
from the valve, not over it.
20 Cable, twin core, brown & blue
21 Board, insulating
22 Resistor
23 Connector
24 Cable, twin core, brown & blue
25 Dragline solenoid valve
26 Socket, dragline
27 Plug, dragline
28 Button, dragline operating
SERVICING 3.21