Technical information

DRIVE ALIGNMENT
Alignment of motor drive shaft and
reversing box must be within 1mm (0.40”).
DYNAMO BELT ADJUSTMENT
Slacken the two bolts on the dynamo
adjusting link and the two bolts securing
the dynamo to its mounting bracket.
Pivot the dynamo until the drive belt is
correctly tensioned. The permissible belt
deflection halfway between the pulleys is
12mm. Retighten bolts securely.
BOLT TORQUES
Every week for the first month, then
every three months:
Check the tightness of all bolts, nuts, and
keys etc. Pay particular attention to engine
mounting bolts.
SERVICING 3.5