Technical information

DRAGLINE PORT BLOCK G - 3
Item Part no Serial no Description Qty
NOTE: Either the Port Block assembly, or the Winch Motor
Adaptor assembly
(see page G-4 )
will be fitted to the
winch hydraulic motor, but not both.
…….
555267600 / 84 WINCH PORT BLOCK, assembly 1
1 555267400 PORT BLOCK 1
2 555267500 BOLT, banjo 2
3 555267100 SPRING, bleed valve 1
4 101120000 BALL, steel 1
5 446611000 ADAPTOR, male, stud 2
6 360400400 PLUG, shouldered 1
7 404900606 SCREW, set, socket head 1
8 555270600 WASHER, copper 2
9 100S04 SEAL, bonded 1
10 100S03 SEAL, bonded 2
11 555270600 WASHER, copper 2
(Used only when necessary
to obtain sufficient clearance.)
12 100S05 SEAL, bonded 2
V601138 / issue 02 0492