User's Manual

AC OPERATION
Connect the plug to the AC socket of the unit and the other end to a standard AC outlet.
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands.
2. When planning not to use this unit for a long time, disconnect the power cable from the wall
outlet.
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in order to
avoid shock risks caused by damaged cable.
BATTERY OPERATION
Disconnect the AC Cord Set completely. Open the Battery Compartment Door and insert 6 pieces
UM-2 "C" size batteries into the battery compartment with battery polarity as shown inside the
battery compartment.
RADIO OPERATION
1. Press SOURCE button to select AM or FM radio mode.
2. Press the SKIP  button or SKIP  button step by step to tune to the desired radio stations.
3. Press and hold the SKIP  button or SKIP  button to search the next radio station in the
direction of the search. The search operation simply finds stations with strong signals,
Stations with weak signal can only tuned in step by step
4. If FM stereo broadcast received, (ST) will display on the LCD display.
5. Use the VOLUME+ or VOLUME− button to adjust the volume to the desired listening level.
TO STORE THE RADIO STATIONS IN THE MEMORY
1. Press the SKIP  button or SKIP  button to search the desire radio station.
2. Press the MODEPROG//MEM button, the display with show “PXX” and flashing and press the
SKIP  button or SKIP  button to select the desired memory radio station number.
3. The radio station will store in the memory after 5 seconds.
4. Up to 20 radio stations can stored in the memory.
TO SELECT A STORED RADIO STATION IN THE MEMORY
Press the STOP/M+ button to skip to the next stored radio station.
CD OPERATION
1. Press the SOURCE button to select CD mode.
2. Insert an audio CD disc in the CD compartment and close the CD door, the unit will start
reading the disc, it will show the total number of tracks of the entire disc after reading and
start playing the first track of the entire disc.
3. During playing, press the PLAY/PAUSE button to temporarily pause playing. To resume,
press the PLAY/PAUSE button again.
4. To stop playing the disc, simply press the STOP/M+ button
- 8 -
Skip Mode
1. In PLAY or PAUSE mode, press the SKIP  button to go to the next track.
2. In PAUSE mode, press the SKIP  button to go back to the previous track.
3. In PLAY mode, press the SKIP  button to go back to the beginning of the track.
4. In PLAY mode, press the SKIP  button twice to go back to the previous track.
Different Play Mode
In CD mode, press the MODE/PROG/MEM button to select different kinds of play mode with the
following sequence.
Repeat 1 ¨ Repeat ALL ¨ Normal
y Repeat – repeat the track being played.
y Repeat ALL – repeat all the tracks in the entire disc.
y Normal – play the tracks in sequence.
Programming
The programming can only be done in STOP mode
1. Press the MODE/PROG/MEM button, the LCD display will show P01 and flash.
2. Use the SKIP
or SKIP button to select the desired track.
3. Press the MODE/PROG/MEM button again to store the selected track in the memory, the LCD
display will show P02.
4. Repeat steps 2 to 3 to store more tracks in the memory. You can store up to 20 tracks in the
memory.
5. Press the PLAY/PAUSE button to start playing the disc in the programmed order.
6. To stop playing, press the STOP button.
7. To cancel the programming list, press the STOP button again.
AUX IN JACK
MP3/AUX IN CONNECTION
1. Insert one side of the audio cable (requires 3.5mm stereo plug, not supplied) into the line-out
jack or phones jack on your MP3 player and the other side to the aux-in jack on the unit.
2. Press the source to select AUX mode
3. Turn on your MP3 player and follow the playback instruction.
4. To stop this function, simply turned off your MP3 player.
- 9 -