User's Manual
LOCATION OF CONTROLS
1 Speaker 11
SKIP/TU button
2 VOLUME knob 12 CD door OPEN button
3 LCD display 13 CD compartment
4 ON/OFF button 14 Speaker jack R
5 SOURCE button 15 Speaker jack L
6 MODE button 16 Phones jack
7 PROG/MEM button 17 AC power cord
8 PLAY/PAUSE button 18 FM wire antenna
9
STOP/M+ button
10
SKIP+/TU+ button
- 4 -
CONNECTING THE LOUDSPEAKERS
Connect the cables of the two loudspeakers to the corresponding input (R) for the right speaker
and input (L) for the left speaker, located at the back of the unit.
Warning:
y Connect the loudspeakers before powering the unit:
y The unit may not work properly or get damaged if you use speakers different than the ones
supplied with the unit.
AC OPERATION
Connect the power cable plug to the wall outlet.
ATTENTION
1. Do not plug or unplug the power cable while you have wet hands;
2. When planning not to use this unit for a long time, disconnect the power cable from the wall
outlet;
3. When disconnecting the power cord from the wall outlet, do not pull on the cord in order to
avoid shock risks caused by damaged cable.
RADIO OPERATION
1. Press SOURCE button to select AM or FM radio mode.
2. Press the SKIP+/TU+ button or SKIP/TU button step by step to tune to the desired radio
stations.
3. Press and hold the SKIP+/TU+ button or SKIP/TU button to search the next radio station
in the direction of the search. The search operation simply finds stations with strong signals,
Stations with weak signal can only tuned in step by step
4. If FM stereo broadcast received, ST will display on the LCD display.
5. Use the VOLUME knob to adjust the volume to the desired listening level.
TO STORE THE RADIO STATIONS IN THE MEMORY
1. Press the SKIP+/TU+ button or SKIP/TU button to search the desire radio station.
2. Press the PROG//MEM button, the display with show “PXX” and PROG will flash in the
display.
3. Press the SKIP+/TU+ button or SKIP/TU button to select the desired memory radio station
number and press the PROG/MEM button to store the station in the memory.
4. The radio station will store in the memory after 5 seconds.
5. Up to 20 AM and 20 FM radio stations can stored in the memory.
TO SELECT A STORED RADIO STATION IN THE MEMORY
Press the STOP/M+ button to skip to the next stored radio station.
CD OPERATION
1. Press the SOURCE button to select CD mode.
2. Insert an audio CD disc in the CD compartment and close the CD door, the unit will start
reading the disc, it will show the total number of tracks of the entire disc after reading and
start playing the first track of the entire disc.
3. During playing, press the PLAY/PAUSE button to temporarily pause playing. To resume,
press the PLAY/PAUSE button again.
4. To stop playing the disc, simply press the STOP/M+ button
- 5 -