Installation & Assembly

7
Parts not supplied
➢ Duct tape
➢ Preinstalled ventilation system and ductwork
➢ Preinstalled outside duct cap or weatherproofing
Installing the range hood
This installation is for mounting the product to a ceiling. Ensure your ceiling has the proper support to
hold the range hood weight. These instructions are general guidelines, please consult professional
installation specialist regarding the best type of mounting hardware and support system based on
your ceiling construction. All island range hoods must be installed and supported by studs and joists in
your ceiling. All homes constructions are different and installations will vary.
1. Begin installation by removing the filters (D) and removing any tape on the air flow flappers (C).
2. Remove protective film from range hood and ducting. When handling the ducting please wear protective
gloves to avoid sharp edges.
3. If your model has an electronic touch sensor control panel, remove the protective plastic film covering the
control panel.
F
G
H
I
J
Inner
Outer
K