Installation & Assembly

INSTALLATION INSTRUCTIONS for Island Range Hood

Parts supplied (Note: The fasteners included may not be suitable to your ceiling structure. Please check with the

installer on proper fasteners to be used based on the material makeup of your ceiling)

A. Range Hood

B. Power Cord (attached to range hood)

C. 6” or 8” round vent air flap depending on model (attached to range hood on top of unit)

D. Aluminum or Stainless Steel Filter(s) (attached to the bottom of the range hood)

E. (8) Support frame brackets. (4) upper and (4) lower

F. (1) 6” or 8” round flexible duct exhaust hose depending on model

G. (4) Phillips #10 X 2-3/8 Screw (expandable caps not to be used in some models)

H. (2) Stainless Steel Ducts (inner and outer)

I. (66-70) #6 X 3/8 SM Screw. Quantity will vary by model

J. (1) Ceiling mounting bracket to support either 6” or 8” flexible duct exhaust hose depending on model

K. (1) Grease collection tray. Will be preinstalled if the model purchased comes with a tray. Not all models

contain a grease collection tray.

Upper

Lower