Owner's manual

3
Your unit uses a nitrogen or argon cylinder (not included) located remotely and connected to your unit by an 8-foot long braided
hose that has a metal quick disconnect tting on the end. is hose exits the rear of the unit at the bottom next to the power cords.
e aluminum lter screen on rear attaches with magnets and must be cleaned every 2 months, more often if dusty or dirty. e lter
screen covers the lower vent cover, and must always be in place when unit is operating.
Operating Your Unit
Changing bottles
1. Pinch o the nitrogen clamp.
2. Loosen the thumbwheel.
3. Remove the empty bottle, replace with full bottle.
4. Follow steps 1-7 listed in “Setting Up Your Unit".
CAUTION: Risk of Electric Shock !
is equipment may have two or more power supply cords.
Unplug all cords before moving or servicing this equipment.