Specifications

6
Setting Up the RC-1010
If your service provider or system installer has already set up the TV antenna and connected it to the
receiver, then you may want to skip this section. However, if you are setting up the system by yourself,
please read this section and follow all the precautions listed under “Important Safety Instructions" on
page 1.
Note: Installation procedures for a TV antenna and related equipments are not covered in this manual.
Package Contents
Unpack the receiver and verify that all of the following items are included. Remember to keep the
packaging in case you need to return the receiver for repair or upgrade. Examine all the items to ensure
that nothing has been damaged during shipment. If any of the items is damaged, please contact your
service provider or local distributor before continuing with installation.
 RC-1010 HDTV Receiver
 Remote Control (with 2 AAA batteries)
 Audio Cable with RCA jacks
 Component Video cable (Y/Pb/Pr)
 Adapter
 This user’s manual
Description of Equipment
The RC-1010 digital receiver is designed to receive free-to-air TV access programs from VHF and UHF
band TV channels. The receiver can be operated via the remote control or directly from the front panel
as indicated in the following pages. The receiver also provides a wide variety of connection options for
your TV and other home entertainment equipments: Component Video Y/Pb/Pr, Composite Video (RCA),
S-Video, Audio L/R (RCA), Fiber Optical S/P DIF.