Specifications

26
Time Zone
●On the Setup menu, Select ”TIME ZONE” and
press ENTER.
● Press ▲ to highlight the “AREA” and then press
◄ or ► buttons to change time zone ( four time
zones) .
● Press ▼ to highlight the “Daylight Saving”, and
then press ◄ or ► buttons to slect “ON” or “OFF”
buttons.
● Press the EXIT or ENTER button to go back to the
main menu or the press MENU button to leave.
About (Receiver Information)
● Under Setup’s sub-menus, you can select the item
“About” to check the hardware and software
version.
● Press▲ or ▼ buttons to highl
ight About and press
the ENTER button to see the information window.
● Press the EXIT or Enter button to go back to the
main menu or press the MENU button to leave.
Reset Box
The “Reset Box” function allows you to reset your RC-1010 Receiver back to the factory default status.
● On the “Setup” page, press ▲or ▼ buttons to
highlight the Reset Box, then press Enter. The
RESET confirmation message “Select YES to
restore default value” will pop up.
1. Use your ◄ or ► keys to highlight “yes”
and press ENTER to accept.
2. Use ◄ or ► keys to highlight “NO” and
press ENTER to cancel the setting.
● Press the EXIT button to go back to the main
menu or press the MENU button to leave.