Specifications

25
Sound (Digital Audio Output Setting)
The digital channel’s sound can be output from the
rear-panel S/P DIF connectors on your Set-Top Box.
After connecting an optical digital-audio cable, you
must specify the transmission format (Dolby Digital
®
or PCM).
● Press Enter on Sound to show the audio format
option, you can press ◄ ► buttons to highlight
the desired audio format, and then press Enter to
confirm the setting.
● Press EXIT or ENTER button to go back to the
main menu or press MENU button to leave.
Opacity (Changing Transparency of On-Screen-Display)
● Press ▲▼ buttons to highlight the Opacity and
press Enter.
● Use the ◄ ►buttons to change the percentage of
the On-Screen Display’s transparency.
● Press EXIT or ENTER button to go back to the
main menu or press MENU button to leave.
I-Plate (Changing Display time of the information-Plate)
● Select the I-Plate, you can press ◄ ► and ▲▼
buttons to change the Information-Plate display
time to 2, 4, 6 seconds or off mode.
● Press the EXIT or ENTER button to go back to the
main menu or press the MENU button to leave.