Specifications

Auto Scan

The steps required to automatically program the receiver are outlined as below:

● Press ◄ or ►keys to move highlight to the

CHANNEL menu. You see three sub-menus:

1. Edit

2. Auto Scan

3. Manual Scan

● Press ▲ or ▼ buttons to highlight AUTO SCAN ,

and then press Enter. An AUTO-SCAN window

shows the SCAN status.

● The receiver scans Off-Air channels and searches

ATSC digital signals from channel 2 to channel 69.

The percentage bar shows the progress being

made.

● Once the digital TV signal is scanned, the channel

number and the program name are shown on the

“Scan List”.

● It takes about three minutes to complete the

whole scanning process.

●

Scanning ends on channel 69. When it is

complete, you can press "EXIT" to leave this

window or press "MENU" to exit the menu system.