Specifications

8
SECTION
Coast to Coast
CARAVAN & LEISURE
900-00010
The Sensar RV-3095 antenna has a
built in amplifier and unique circuitry
that gives you clear VHF/ UHF reception
wherever you park your RV. Easy to
install, and is bidirectional and corrosion
resistant. Digital ready when combined
with digital off-air tuner or HD digital
television.
900-00014
Winegard antenna same features as
RV3095 supplied in bulk pack (Sold in
packs of 4). Digital ready when combined
with digital off-air tuner or HD digital
television. Full range of spare parts
availablefrom any Coast branch
900-00020
Winegard Omni directionalantenna,
12v amplified supplied in display box
900-00050
Winegard Sensar HV Antenna (OEM) - A new & innovative
antenna that receives both horizontal & vertical digital signals
allowing for reception of more channels. It features two
independently amplified antennas to deliver maximum digital
VHF/ UHF programming. Made in the USA, this bidirectional
antenna receives analogue as well as standard & HD digital
signals & has been designed to fit rooves from 2.5cm – 12cm
thick. The OEM pack contains x4 Sensar HV Antenna kits which
include: antennas mounted on the reliable
crank-up lift turret assembly, a white on/ off
power supply switch, hardware, 6.1mt coax
cable & a 139.7cm coax cable. C-tick certified.
The Winegard Sensar HV comes with a 1 year
limited warranty, covered by Coast.
900-00060
Winegard Sensar HV Antenna (Single) Box - Has all the same
features as the OEM pack (i.e. comes with complete antenna/ lift
assembly, white on/ off wall plate & power supply switch, coax
cables & mounting hardware) except that it is sold singularly.
900-00070
Winegard Sensar HV Antenna Retrofit Kit (With Head &
Mast)- This allows you to replace the amplified head on an
existing Winegard antenna with the Sensar HV bidirectional
head.* It can also be used to replace the heads on Antennatek
antennas as the old elevating gear can be used.
*Please check the roof clearance prior to purchasing the Sensar
HV Retrofit Kit (refer
to diagram, showing
minimum roof top space
required)
900-00372
Designed, built and hand tested in the USA, the
Sensar Pro allows you to find the highest signal
strength and thus watch TV. It has an adjustable
amplifier which provides up to 10dB for increased
performance if needed.
Dimensions (cm): 11.4H x 7W x 1.9D
Weight (gr): 81.6
Cables/Outputs included: Antenna IN, Cable IN, TV1 OUT and TV2 OUT
900-00364
A convenient TV outlet with 75ohm coax cable
input & output. It has a (+) 12V DC receptacle &
flush mounts in a standard electrical box (or use
plaster straps included).
900-00400
Used to extend the directional handle on
leisure vehicles with a thicker roof. Roof
thickness in excess of 4.75” (120.65mm) and
up to 7” (177.8mm) would require an extension.
(The handle and extension should be glued together after
checking that you have the correct handle. The handle will not
work properly if it is not glued together.)
tV eQUIPMent
WInegard “roadstar” antenna
WInegard sensar HV antenna
WInegard sensar Pro
WInegard WHIte 2nd tV WaLL PLate onLY
WInegard dIreCtIonaL HandLe eXtensIon
WInegard rVH 3095 sensar rV tV antenna W/
PoWer sUPPLY
166
Specifications:
Range: 144Km
Operating Voltage: 12V DC
Operating Dimensions: 43.2W x 116H (cm)
Stowed Dimensions: 125.3L x 11.2H (cm)
Weight: 3.13Kg