O Model C-1000 TM mobile entertainment system
Table of Contents Welcome....................................................2 Product Registration...................................3 What is Mobile Digital TV?.........................4 CIOtvTM Parts List........................................5 Optional Accessories.................................7 Using your CIOtv AutoMount.....................8 Getting Started.........................................10 Touchscreen Controls...............................11 CIO Entertainment Options.................
Welcome CIOtv by Winegard is a Multi-Standard Entertainment System specifically designed to OEM automotive standards. Designed to OEM standards means that CIOtv is built to the same quality standards as a new car and adheres to all of the Federal Motor Vehicle Safety Standards (FMVSS) as mandated by the National Transportation Safety Administration. While your entertainment experience is important, the safety of your passengers and family is our first priority.
• If you remove or dismount your CIOtv from the provided headrest mounting system (AutoMount), always remove and stow the bracket assembly. A warning label is provided in two locations on the headrest bracket assembly. Failure to do so may result in head injury. • Make sure children are securely “belted in” while viewing CIOtv. While CIOtv is equipped with convenient touchscreen controls, smaller children may not be able to reach the screen. A remote control is provided for remote operation.
What is Mobile Digital TV ? CIOtv is equipped with the latest in digital television technology. Just like your home television, your CIOtv television experience is digital. But that’s where the comparison stops. The CIOtv receiver can operate while you or your vehicle is in motion. The all new digital TV technology known as MDTV or ATSC-MH (mobile handheld) receives live TV from your local TV station at no additional cost. It’s free. TV anywhere….anytime.
CIOtv Parts List The CIOtv Entertainment System consists of the following parts: 1. CIOtv 10.2” TFT Viewer 2. CIOtv AutoMount with wiring harness 3. Remote Control 4. IR Headphones (C-2510) 5. AV AUX Input Cable (C-2545) 6. Owner’s Manual 7. Four (4) ea. “AAA” batteries 8.
4 Red LED’s IR Receiver (IR Transmitter) (Infrared Remote Control) Light Sensor These sensors control the CIOtv operation. DO NOT block these sensors.
CIOtv Optional Accessories: Available from www.winegard/ciotv.com 1. 2. 3. 4.
Using Your CIOtv AutoMount CIOtv comes equipped with a convenient automotive headrest mounting system designed to fit a wide range of vehicle types and models. While Winegard makes no guarantee that the CIOtv will fit your vehicle, check the dimensions of your headrest posts before attempting to install the CIOtv AutoMount. CIOtv is designed to fit the following headrest post configurations: Headrest post diameters between 10mm and 14mm. Headrest post spread dimensions between 110mm and 170mm on center.
AutoMount Bracket Assembly Release Tabs Openings for Headrest Posts AutoMount Clamp Assembly CIOtv AutoMount Assembly AutoMount Assembly with CIOtv Viewer NOTE: The AutoMount Bracket Assembly is designed to plug into the AutoMount Clamp Assembly. Depress both tabs at the front of the AutoMount Bracket Assembly and pull to release. Tools needed for assembly: 1. #1 Phillips head screwdriver 2.
Getting Started Software Updates: CIOtv is an entertainment computer that depends on complex software to run and process the available audio and video options. To insure that you have the latest CIOtv software, refer to Setup/ System Information from the CIOtv Home Screen. Check the Firmware version against the latest version at www.winegard.com/ciotv If the Firmware version is different, you will want to update your CIOtv firmware.
5. The second and last step of the update process is the programming of the CIOtv internal memory with the data from the file that was loaded to the CIOtv in the first step. This will progress from the 0% to 100%. 6. When the update is complete, the screen will say “CIO update complete”. 7. Remove SD card and reboot the CIOtv unit using the power button. Power Up: CIOtv can be operated while mounted in your car on the CIOtv AutoMount bracket or as a hand-held device.
1. If installed in your vehicle, turn vehicle ignition to ACC (accessory) or Start the engine. CIOtv will operate in the ACC position but may deplete your vehicle battery unless the engine is running. 2. Press the POWER button on the upper top left corner of CIOtv. The Winegard logo will briefly appear and the CIOtv Home Screen will start. This should take about 20-25 seconds. You are now ready to operate your CIOtv. To shut off power, press the power button again.
• For External Audio through your car factory sound system, touch the FMM icon on the CIOtv Home Screen. Select “Enable FMM” and select an FM frequency from the available frequency drop down list (select a frequency that is not already being used by a local broadcast). Select Done. • For Wireless Headphones touch the headphones icon at the top of CIOtv Home Screen. Select Channel A or B. Select Done.
4. Select the video source icon of choice. You can always go back through the Home Screen menu or select the Home icon at the far left of the screen. If the Home icon disappears, simply touch the screen at any location (While video is playing, the icon will disappear after five seconds if not used). ! Caution: Always remember to check sound levels before putting on headphones or allowing use by children.
CIOtv Home Screen - Entertainment Options Tap an icon to select your entertainment option. See detailed operating instructions for each entertainment option below. Note: The status icons at the lower right corner of the CIOtv Home Screen will be highlighted when an iPod device is connected or a DVD disc or SD / USB media storage device is inserted. Remote Control Layout and Operation An IR sensor is located in the front panel of CIOtv.
Power Dash DVD Menu Mute Volume Up Volume Down Home Screen Icons TV Channel Scan FM Modulator TV Channel Recall Subtitles Home Screen Icons HOME TV iPOD TV Channel List Directional Navigation Arrows (Up/Down/Left/Right) OK / Enter AUX Channel Up DVD/CD Channel Down USB/SD SET UP DVD Controls INTERNET 16
Using Mobile TV Select the TV icon from the CIOtv Home Screen. The TV screen will appear. If no channels appear on the station list, you will first need to scan for available TV channels in your area. Select the Channel Scan icon from the lower right corner. Channel scan usually takes several minutes to complete (you can cancel at any time by selecting channel scan stop).
Note: The CIOtv on-screen control and playback feature may work with other or later versions of iPod and iPhone products. USB connection to CIOtv via the standard iPod/iPhone supplied cable may also support audio and video playback for a wider variety of models. Please refer to www.winegard.com/ciotv for a full listing of supported devices. You can connect your iPod or iPhone to CIOtv in several ways: 1.
3. If you don’t have a special connector cable, you can always connect your iPod to CIOtv via one of the USB ports by using the standard 30 pin/USB connector cable supplied with your iPod or iPhone. Note: Using this option allows you to control your Apple device from the CIOtv Home Screen, however you will not have video playback capability. This option supports audio playback only. After connecting CIOtv using one of the previous options, you may now navigate and control your iPod.
When music selections are playing, these screens appear: Games/AUX Input Aux Input Mode: CIOtv can display auxiliary analog A/V input supplied through the 3.5mm jack and composite adapter cable (supplied). Insert the 3.5mm connector into the AUX Input jack on the left side of CIOtv. From the CIOtv Home Screen select Games / Aux. From the Games / Aux screen select Aux Input.
Companion CIOtv Mode. When the companion video cable is connected through the CIOtv AutoMount vehicle harness, you can view A/V content produced and displayed on your other (Companion) CIOtv. This allows you to share DVD or other A/V content. To activate the Companion CIOtv mode: 1. From the CIOtv Home Screen select Games / Aux. Then select Companion CIOtv. 2.
Basic DVD Operation The CIOtv DVD system is designed specifically for automotive use where road vibration, shock and extreme environmental conditions may exist. While the OEM grade DVD drive mechanism and laser reader are very robust, a little care will go a long way to ensure years of trouble free use. Never insert foreign objects, liquids, food items or anything other than a DVD disc into the DVD drive slot located on the right side of the CIOtv player.
! CAUTION: Inserting hands, fingers, or foreign objects in Disc insertion slot may result in personal injury or product damage. Do not attempt to insert more than one disc at a time. DVD Controls (see screen above) Eject: DVD discs can be ejected by either pressing the eject button on the upper right corner or by touching the eject icon at the lower left corner of the DVD control screen. Rew: Reverses direction of play. Each time Rew is pressed, the speed of reverse play is increased (2X, 4X, 8X, 16X) .
Play/Pause: Toggles the DVD player between Play and Pause. PLAY/PAUSE button resumes playback from position at which it was stopped. Next: Goes to beginning of next chapter. FF: Advances DVD play. Each touch increases speed of FF (2X, 4X, 8X, 16X). Touch PLAY to return to normal play mode. DVD Menu: Press this to return to the DVD disc’s main menu. Use the touchscreen to make a selection.
! CAUTION: Attempting to play a cracked, warped, irregularly shaped, or damaged disc could severely damage the DVD Player playback mechanism.
2. Copy the latest firmware version from the Winegard website to your SD card at the top level directory (i.e. not in a sub directory). File will be named DvdUpdate.rom 3. Insert SD card into CIOtv – then turn power on. 4. After the Boot-up process, you will be prompted from the CIOtv Home Screen that a DVD upgrade object has been found. Select “Upgrade” or “Cancel”. 5. If “Upgrade” is selected, the DVD ROM will be updated. DO NOT REMOVE SD CARD OR POWER DOWN DURING THE ENTIRE UPDATE PROCESS. 6.
Using USB or SD Media Your CIOtv is equipped with two (2) high speed USB Host Ports located in the recessed area at the top of your device and an SD card reader (1) located on the left side of CIOtv. USB Ports SD Card Slot You may use standard USB devices or SD card storage media to play audio, video and photo files on your CIOtv. When a USB/SD device is inserted, the USB/SD icon at the lower right corner on the CIOtv Home Screen will show that a device is connected or inserted.
Previous: Displays previous photo. The following file formats are supported by CIOtv SD/USB player: Video decoding: MPEG-4, WMV Picture decoding: JPEG, BMP, PNG, GIF Audio decoding: AAC, MP3, WMA Play/Pause: Play or pause slide show of photos in thumbnail group. Next: Displays next photo. Internet CIOtv is equipped with a Wi-Fi receiver capable of connecting your device to the internet.
Setup Screen The following Setup Screen icons allow you to setup, adjust, enable or calibrate your CIOtv. TV – CIOtv is equipped with both an internal and external MDTV antenna. Generally, the external antenna delivers better MDTV reception. If your CIOtv is connected to an external antenna through the CIOtv AutoMount, select TV from the Setup menu, then select “Use external TV antenna” from the TV dialog box. Select Done.
Video – Video adjustment for picture brightness, contrast and the brightness of the LCD backlight can be adjusted using the sliders on the Video Setup Screen. We recommend that you set the backlight brightness to Auto-adjust for optimal brightness during daylight or night-time operation. CIOtv is equipped with a light sensor that adjusts the backlight for daytime/night-time viewing. The color bars at the left of the screen show relative brightness of the Backlight as the slider is adjusted.
Wi-Fi / Network – Select Network to set up Wi-Fi and IP addresses. To connect to the internet, you must select a Wi-Fi network, access, point and configure your CIOtv for network connection. First, select IP from the Network menu. For automatic IP network configuration (recommended), select Use DHCP (Dynamic Host Configuration Protocol). DHCP allows a computer to be configured for network connection automatically, eliminating the need to configure each time you change location.
Select the Connect icon and enter a password if prompted (a password is not required for non-protected, open networks). Enter Done. (See screen at right). A dialog box will appear – Connect to this access point? Select OK or Cancel. After initial setup, CIOtv will remember the configured networks and passwords and will automatically try to reconnect to the network that you were connected to last.
Wireless Headphones CIOtv wireless headphones receive sound signals via an infrared light beam transmitted from LED’s located in the CIOtv touchscreen. IR headphones operate in a line-of-sight orientation with the infrared LED transmitter on the top edge of the CIOtv screen. Blocking the line of sight with a hand, book or other object might cause interruption of the signal and sound transmission. CIOtv headphones are designed for either mid or rear seat operating ranges up to 9 feet from the screen.
An Auto-Off Power-Saver feature automatically switches headphones ‘off’ 5 minutes after reception of the last detected infrared transmission signal to help conserve battery power. Position 2 and 3 switches audio reception between Channel A and Channel B. Since CIOtv can produce different A/V options independently (i.e. MDTV, DVD, iPod Video, etc.), audio signals must be transmitted through either channel A or B when more than one CIOtv unit is installed in your vehicle.
Aux Audio Out – A 3.5mm jack is located at the lower edge of the right side ear phone. This jack will allow transmission of audio signals at line level if desired for additional devices. Inserting Batteries: Remove battery compartment cover by pushing tab in and lifting cover off at the same time. Insert two, size “AAA” batteries with correct polarity by matching + and - on batteries per the diagram inside battery compartment.
Care and Maintenance CIOtv is a complex digital device. Winegard recommends that you treat CIOtv just as you would a laptop or other hand-held digital devices including cell phones, MP3 players, etc. ! AutoMount Assembly Hinge Tightening CAUTION: 1. Do not immerse CIOtv in water or expose to excessive moisture. 2. Do not expose to excessive shock or vibration. 3. Operate only within recommended temperature ranges. 4.
Specifications Vehicle Safety Standards: FMVSS 201 Occupant Protection in Interior Impact FMVSS 202 Head Restraints FMVSS 207 Seating Systems FMVSS 210 Seat belt assembly anchorages FMVSS 302 Flammability DVD Laser Safety Standards: EN 60825-1:2007 Edition 2 Safety of laser products 21 CFR 1040.10 Performance standards for light emitting products – laser AC/DC Converter: Rated input: 100-250VAC, 50-60Hz, 1A max Rated output: 14V-15V DC, 3.5A max Headphones: Batteries: 2 ea.
Headphones (con’t.): Frequency response: +/-2dB within specified bandwidth Sound pressure level: 100dB max Carrier frequency: Channel A: 2.3MHz (left) / 2.8MHz (right) Channel B: 3.3MHz (left) / 3.
FM Modulator (con’t.): Frequency response: +/-2dB within specified bandwidth Carrier frequency: 88.3 to 107.9 MHz Modulation: FM wideband, +/-75KHz max center frequency deviation Radiated output field strength using internal antenna @3m: 10uV/m min, 250uV/m max Conducted output power: -75dBm min, -50dBm max Conducted output impedance: 50 ohms Aux headphone jack: Connector type: 3.5mm diameter, 3-contact female Sound pressure level: 100dB (max) Aux A/V input: Connector type: 3.
LCD Panel: Display Type: AM TFT Viewing area: 10.
SD card slot: Media: Full-size SD, miniSD (with adapter), microSD (with adapter), MMC File system: FAT Video decode: MPEG-4, WMV Picture decode: JPEG, BMP, PNG, GIF Audio decode: AAC, MP3, WMA, WAV DVD / CD drive: Disc size: 12cm Media Load Type: Side-load DVD media: DVD-ROM, DVD+/-R, DVD +/-RW CD media: CD-ROM, CD-R, CD-RW, VCD, SVCD, CVD, DVCD Video decode: DVD-Video, DVD-VR, XviD, MPEG-4 Picture decode: JPEG Audio decode: Audio-CD, CD-DA, HDCD, MP3, WMA (Lossy) Anti-shock buffer memory: 16MB min Last sce
Warranty Statement WINEGARD COMPANY CIOtv™ ONE YEAR LIMITED WARRANTY (NONTRANSFERABLE) Terms of Warranty Winegard Company (the Company) warrants to the original retail purchaser, that the automotive entertainment product(s) purchased from a Company authorized dealer or retailer are free from defects in materials or workmanship under normal use and conditions for a period of one (1) year from date of purchase, except, the remote control and headphones which are warranted for a period of sixty (60) days fr
EXCEPT AS EXPRESSLY SET FORTH IN THIS WARRANTY, THE COMPANY MAKES NO OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING ANY IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE COMPANY EXPRESSLY DISCLAIMS ALL WARRANTIES NOT STATED IN THIS LIMITED WARRANTY. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW ARE LIMITED TO THE TERMS OF THIS EXPRESSED LIMITED WARRANTY. Some states do not allow limitation on how long an implied warranty lasts.
FCC Compliance FCC Statement Changes or modifications to this product that are not expressly approved by Winegard Company could void the user’s authority to operate this equipment. “This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Winegard Company • 3000 Kirkwood Street • Burlington, IA 52601 • www.winegard.
