Winees Spotlight Cam Winees Scheinwerfer Kamera Model: (NA) WP280013267 (EU) WP280013261 (UK) WP280013263
CAUTIONS To avoid personal injury and/or possible product damage, the following cautions must be followed: 1. Please use sorely the provided adapter instead of others in case of any damage to the product. 2. Keep out of reach of children. This product contains small magnets and other small parts, which can cause choking or injury if ingested. 3. To prevent early failure,the camera should only be installed in operating environments ranging between -20°C ~ 50°C(-4°F ~ 122°F). 4.
FCC Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. Note: The grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user’s authority to operate the equipment.
Package Contents Winees spotlight cam *1 Screw*2, wall anchor*2 AC adapter *1 Reset pin *1 LED on/off description Status Description Solid Red Power on/System booting / Factory reseting Flashing Red Wireless connection, Cloud connecting fail Solid Green Wireless connected Flashing Green System ready for WiFi setup / Firmware update Red and Green flashing alternately Unable to connect to the cloud 3
Installation Option 1: Mounted on a Wall Option 2: Ceilling installation 4
Requirements and Tech Specs Wi-Fi Network Requirements - Supports IEEE 802.11b/g/n - Your Wi-Fi network broadcasts at 2.4GHz. 5GHz band is not supported - Your network upload speed is suggested to be greater than 1 Mbps to have fluent video streaming. Power (Only for CE) - 100~ 240VAC 50/60Hz power supply for the AC adapter - DC 12V/1A input for the camera - Max. power consumption: 10W - Frequency range:2412-2472MHz - Maximum RF transmit power: 802.11b 16±2dBm, 802.11g 54M 14±2dBm, 802.
Quick Start Guide Step 1 Get the “AiDot” app from App Store or Google Play. Step 2 Create an account and sign in. Step 3 Press ‘+’ button to add the Winees Spotlight Cam. My Home Step 4 Follow the instructions on App.
Trouble Shooting If the default adding camera operation fails - Make sure your wireless router has the Internet access, and the Wi-Fi signal at the location where you install the camera is good. - Make sure the camera is plugged in and the status LED is on or flashing - Reset the camera if the LED is NOT flashing green. Then follow the App to add it. - Make sure the camera is not added to other user’s account. If it is, the owner of the camera has to unbind it first.
Hinweise Beachten Sie die folgenden Vorsichtsmaßnahmen, um Verletzungen oder mögliche Produktschäden zu vermeiden. 1. Bitte verwenden Sie nur den mitgelieferten Adapter. 2. Von Kindern fernhalten. Darf nicht in die Hände von Kindern gelangen. Dieses Produkt enthält kleine Magnete und andere Kleinteile, die beim Verschlucken Ersticken oder Verletzungen verursachen können. 3.
Package Contents Winees Scheinwerferkamera * 1 Netzteil *1 Schraube*2 Wandanker * 2 Zurücksetzen Stift * 1 LED on/off Beschreibung Status Beschreibung Bleib Rot Einschalten / Systemstart / Werkseinstellung Rot blinkend Kabellose Verbindung, Cloud-Verbindung fehlgeschlagen Bleib Grün Kabellos verbunden Grün blinkend System bereit für WiFi-Setup / Firmware aktualisieren Rot und Grün blinkend Keine Verbindung zur Cloud hergestellt werden 9
Installation Option 1: Montiert auf einer Wand Option 2: Deckenmontage 10
Anforderungen und technische Daten WiFi Netzwerkanforderungen - Unterstützt IEEE 802.11b/g/n - Ihr Wi-Fi-Netzwerk sendet mit 2,4 GHz. 5-GHz-Band wird nicht unterstützt - Es wird empfohlen, dass Ihre Netzwerk-Upload-Geschwindigkeit mehr als 1 Mbit/s beträgt, um flüssiges Video-Streaming haben. Leistung (nur für CE) - 100~ 240VAC 50/60Hz Netzteil für das Netzteil - DC 12V/1A Eingang für die Kamera - max. Leistungsaufnahme: 10W - Frequenzbereich: 2412-2472 MHz - Maximale HF-Sendeleistung: 802.
Schnellstart Anleitung Schritt 1. Laden Sie die App „AiDot“ herunter Schritt2. Erstellen Sie ein Konto und melden Sie sich an. Schritt3. Tippen Sie auf "+", um die Winees Spotlight Cam hinzüfgen. My Home Schritt4. Folgen Sie den Anweisungen auf App.
Allgemeine Fehlersuche Wenn der Standard Kamerabetrieb fehlschlägt - Vergewissern Sie sich, dass Ihr WLAN-Router über den Internetzugang verfügt und dass das WLAN-Signal ist einwandfrei. - Vergewissern Sie sich, dass Netzteil ist eingesteckt und die Status LED leuchtet oder blinkt - Setzen Sie die Kamera zurück, wenn die LED NICHT grün blinkt. Folgen Sie dann der App, um Kamera hinzuzufügen. - Vergewissern Sie sich, dass die Kamera nicht zum Konto eines anderen Benutzers hinzugefügt wurde.
Contact Us / Kontaktieren Sie uns Linkzone Technology Co., Limited ROOM 20 5/F WAYSON COMMERCIAL BLDG 28 CONNAUGHT ROAD WEST SHEUNG WAN HK Phone: 1-855-334-9800 Website: www.iwinees.com Email: support@iwinees.