Manual

- 4 -
Features and Specifications
Wine-Mate ceiling mount split cooling systems WM-2500~8500SSD are
designed and used to provide a cold temperature between 50~65 °F for a
properly insulated wine cellar.
The wine cellar will maintain humidity range within 50~70% RH.
These temperature and humidity ranges like in natural caves are optimized
for long term storage of wine.
SSD units consist of a condensing unit and an evaporator unit; they are
connected by a liquid line and an insulated suction line.
SSD condensing units can be located away from the wine cellars 50 ft so that
noise and compressor vibration are isolated.
SSD evaporator units provide two way air supply operation. The evaporator
units can be installed on the ceiling in the center of a wine cellar.
Fig. 1 SSD Ceiling Split Cooling System
NOTE:
Capacity is determined under the cellar, the cellar ambient and the
condensing unit ambient temperatures of 55°F, 75°F and 90°F, with R13
interior and R19 exterior insulations. Any higher ambient temperatures,
lower insulations will cause reducing capacity and the cellar temperature
may not be maintained at 55°F.
CAUTION:
If the installation area will be below 50°F, purchase a low ambient condition
kit.