Specifications

30
Deg F or Deg C
Setting 1
 Press the “Down” arrow to change temperature
from Deg F to Deg C.
 Press the “Up” arrow to change temperature
from Deg C to Deg F.
Low temperature
alarm set point
Setting 2
 Press “Mode” button to advance to Setting 2.
 Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is 10 Deg. C.
High temperature
alarm set point
Setting 3
 Press “Mode” button to advance to Setting 3.
 Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is 18 Deg C.
Low humidity
alarm set point
Setting 4
 Press “Mode” button to advance to Setting 4.
 Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is 5%.
High humidity
alarm set point
Setting 5
 Press “Mode” button to advance to Setting 5.
 Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is 95%.
Add or remove
humidifier
Setting 6
 Press “Mode” button to advance to Setting 6.
 Press the “Up” or “Down” arrow buttons to
adjust to the desired set point. Factory default
is zero (0).
Zero (0) = No humidifier
One (1) = Stand-alone remote mounted
humidifier
Two (2) = Integral Wine Guardian mounted
humidifier (Not for TTW applications)
Fan AUTO or ON
Setting 7
 Press “Mode” button to advance to Setting 7.
 Press the “Up” or “Down” arrow buttons to
adjust number to the desired set point. Factory
default is zero (0).
Zero (0) = Auto – fan only turns on when
there is a call for cooling or heating
One (1) = Fan On – fan remains on
continuously
Heronhill - for all your Wine Guardian requirements
Tel: [phone]
www.heronhill.co.uk
Fax: [phone]