Instruction Manual

47
调整湿度
Change Humidity
 按向上键一次。
屏幕将显示出目前温
度设定值。

 Press the “Up Arrow” once. This display
will show the existing temperature setpoint.
 按下模式键一次，让屏幕显示湿度设定值。
 Press the “Settings” button once to display the
Humidity setpoint.
使用向上与向下键调整湿度。
 Press the “Up” or “Down” arrows to adjust
the humidity to the desired setpoint.
提示：在安装Wine Guardian加湿
器，并将其第6个设定项设定为“1”
之后，控制器才可显示并调整湿度。
NOTE: a Wine Guardian humidifier
must be installed and setting six set to
“1” before the controller will display and
let you change percent humidity.