User guide

75
Alarm Codes 报警代码
High temperature
alarm (!)
高温警报
Flashing
temperature
number
闪动“温度”和“!”
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing temperature number”
Along with flashing (!) symbol will remain on screen
until temperature falls below the High Temperature
Alarm set point (Setting 3).
按向上或向下键一次将警报转至显示正常温度与
湿度读数。闪动“温度”和“!” 信息将在屏幕上保
留，直到温度低于高温警报触发点为止（设定
3）。
Low temperature
alarm 低温报警
闪动“温度”和“!”
Flashing temperature
number
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing temperature number”
Along with flashing (!) symbol will remain on screen
until temperature rises above the Low Temperature
Alarm set point (Setting 2).
按向上或向下键一次将警报转至显示正常温度与
湿度读数。闪动“温度”和“!” 信息将在屏幕上保
留，直到温度高于低温警报触发点为止（设定
2）。
High humidity alarm
Flashing humidity
number
高湿警报 !
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing humidity number”
Along with flashing (!) symbol will remain on screen
until humidity falls below the High Humidity Alarm
set point (Setting 5).
按向上或向下键一次将警报转至显示正常温度与
湿度读数。闪动“湿度”和“!” 信息将在屏幕上保
留，直到湿度低于高湿警报触发点为止（设定
5）。
Low humidity alarm
Flashing humidity
number
低湿警报 !
Press the “Up” or “Down” arrow once to change
screen from alarm to normal Temperature and
Humidity indication. “Flashing humidity number”
Along with flashing (!) symbol will remain on screen
until humidity rises above the Low Humidity Alarm
set point (Setting 4).
按向上或向下键一次将警报转至显示正常温度与
湿度读数。闪动“湿度”和“!” 信息将在屏幕
上保留，直到湿度升高于低湿度警报触发点为止
（设定 4）。
USER MANUAL 用户使用手册