Use and Care Manual

OPERATING INSTRUCTIONS
We recommend that you charge your electric wine opener for at least 12 hours before using it for the first time.
Please follow the instructions for recharging below:
Recharging your electric wine opener. Plug one end of the adaptor cord into the base of the recharging unit and the
other end into a main socket. Place the electric wine opener into recharging unit ensuring that it is firmly in position
and that it is fully engaged with the recharging connection. Blue LED lights illuminate when wine opener is being
charged . It will take appoximately10 hours to recharge your electric wine opener, it can use be used to open
approximately 35 bottles when fully recharged.
To operate your electric Wine Opener
1. Before remove the cork you must remove any foil from the bottle using the cutter provided (see fig.2)
2. Hold the wine bottle with one hand and place the electric corkscrew onto the wine bottle. Then press down on
the corkscrew to automatically start removing the cork. The LED light turns on when the corkscrew is in use.
(see fig.3)
Fig 3
3. Push the release button on the top of the corkscrew, the spiral will turn in an anticlockwise direction and release
the cork.(see fig.4)
Fig 4
DO NOT put fingers or objects near the spiral while in use for your safety and the functioning of the unit.