Manual

OPERATING INSTRUCTIONS
We recommend that you charge your Wine Enthusiast Electric Blue Push-Button Corkscrew for at least eight hours
before using it for the first time. Please follow the instructions for recharging below:
Recharging your Wine Enthusiast Electric Blue Push-Button Corkscrew. Plug one end of the adaptor cord into
the base of the recharging unit and the other end into a main socket. Place the Wine Enthusiast Electric Blue
Push-Button Corkscrew into recharging unit ensuring that it is firmly in position and that it is fully engaged with the
recharging connection. It will take approximately 6-8 hours to recharge your Wine Enthusiast Electric Blue
Push-Button Corkscrew, it can use be used to open approximately 40 bottles when fully recharged.
To Operate your Wine Enthusiast Electric Blue Push-Button Corkscrew
1. Before remove the cork you must remove any foil from the bottle using the cutter provided (see fig.2)
2. Place the Wine Enthusiast Electric Blue Push-Button Corkscrew on top of the wine bottle making sure that it
remains as upright as possible at all times. If you hold the Wine Enthusiast Electric Blue Push-Button Corkscrew
at an angle to the bottle it will not remove the cork properly. (see fig.3)
3. Hold the Wine Enthusiast Electric Blue Push-Button Corkscrew firmly and depress the down button, the
corkscrew spiral will turn in a clockwise direction and enter the cork, then gradually remove it from the bottle.
When the Wine Enthusiast Electric Blue Push-Button Corkscrew mechanism stops the cork has been fully
removed from the bottle.
4. Lift the Wine Enthusiast Electric Blue Push-Button Corkscrew away from the bottle. To remove the cork simply
depress the release button and the spiral will turn in an anticlockwise direction and release the cork.(see fig.4)
5. Always return the electric wine opener to the recharging unit when finished with it. This will protect the
mechanism while it is not in use.