CLASSIC BEVERAGE COOLER, FREE STANDING 269 01 40 01 INSTRUCTION MANUAL PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING AND OPERATING.
TABLE OF CONTENTS Contents ____________________Page Beverage Cooler Package Contents 3 Important Safety & Pre-Use Instructions 3 Installation Instructions 3 Operating Your Beverage Cooler 4 Temperature Settings 4 Layout & Storage 5 Care & Maintenance 5 Troubleshooting Guide 6 Technical Information 7 Warranty Information 7 2
Beverage Cooler Package Contents • • Instruction manual 2 Shelves IMPORTANT SAFETY INSTRUCTIONS To reduce the risk of fire, electrical shock, or injury when WARNING using your appliance, follow these basic precautions: Read all instructions before using the beverage cooler. DANGER: Risk of child becoming trapped in new cellar, old beverage cooler/refrigeration unit, or large boxes.
Operating Your Beverage Cooler Setting the Temperature Control/Display panel 1) Light Control Button 2) Celsius / Fahrenheit Selector Button 4) Temperature Increase Button 5) Temperature Decrease Button 3) LED Display The wine cooler has an interior light. The light can be switched on and off by using the light control button (1). The temperature display can be set to show either Celsius / Fahrenheit by pushing the selector button (2).
LAYOUT AND STORAGE Your cabinet was designed to store a maximum number of bottles securely. We recommend that you observe the tips below to optimize loading. • Remove tape from shelves once unit is stable and ready for storage. • Disperse the bottles evenly to avoid concentrating weight in one place. Bottles must not touch either the back of the cabinet or the step at the bottom. • Make sure that the bottles are not all grouped together either at the top or bottom of the cabinet.
Energy saving Tip The beverage cooler should be located in the coolest area of the room, away from heat producing appliances, and away from direct sunlight. TROUBLESHOOTING GUIDE Many common issues with your beverage cooler can be solved very easily. Try the troubleshooting tips below should you experience any problems. PROBLEM Beverage cooler does not operate. POSSIBLE CAUSE Not plugged in. The appliance is turned off. The circuit breaker tripped or a fuse has blown out.
TECHNICAL DATA Model Number 269 01 40 01 Type of cooling Compressor Climate type ST Electricity protection grade I Nominal voltage/Frequency 115 Volts/60Hz 60-77 degrees Fahrenheit Ambient operating temperature Temperature Range 34-43 F Range of inside cabinet humidity 60%RH Item weight 45 lbs Item dimension (W X D X H) 17” X 19” 32 ¾” WARRANTY INFORMATION LIMITED WARRANTY Length of Warranty: This Limited Warranty lasts for one (1) year from date of receipt of purchase of the beverage co
Purchaser assumes all the risk of using these units, including risk of spoilage, humidity variations, temperature variations, leaks, fires, water damage, mold, mildew, dryness and similar perils that may occur. What We Will Do: During the Limited Warranty Period, Wine Enthusiast and/or the manufacturer will, at its sole discretion, repair or replace any beverage cooler not operating within the manufacturer’s specifications.
