User Manual

1. Turns the Interior Light ON and OFF

2. Alters the Temperature Display to Fahrenheit or Celsius

3. Displays Temperature

4. Increases Set Temperature 1°F with Each Push

5. Decreases Set Temperature 1°F with Each Push

Operating Your Wine Cellar

Each wine cellar includes an operating panel on the front of the unit. This

operating panel includes several features to operate and control the temperature.

Before You Start

The wine cellar should be placed in a location where the ambient temperature is between

60-77° Fahrenheit. If the ambient temperature is above or below this range, the

performance of the unit may be affected. For example, placing your unit in extreme cold

or hot conditions may cause interior temperatures to fluctuate.

Setting the Temperature Control

NOTE: The temperature readout shows the actual cellar temperature, it will

temporarily show the set temperature while making adjustments, then reverts

back after 10 seconds.

1. Make sure power cord is connected to a properly grounded outlet.

2. Set the desired temperature by pushing the UP or DOWN button.