36 Bottle Wine Cellar with VinoView® Shelving User Manual Model Number 268 78 36 08 PLEASE READ THIS MANUAL CAREFULLY BEFORE INSTALLING AND OPERATING 1
IMPORTANT SAFEGUARDS When using this appliance, always exercise basic safety precautions, including the following: 1. Read all of the instructions before using this appliance. 2. This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. 3.
SAVE THESE INSTRUCTIONS DANGER Risk of child entrapment. Before you throw away your old wine cellar, take off the doors. Leave the shelves in place so that children may not easily climb inside. Thank you for using our Wine Enthusiast product. This easy-to-use manual Model number will guide you in getting the best use of your wine cellar. Serial number Please remember to record the model and serial number, they are on a label Date of purchase in back of the wine cellar.
Table of Contents IMPORTANT SAFEGUARDS ....................................................................................2 Wine Cellar Features and Use ...............................................................................6 Initial Setup .........................................................................................................6 Temperature Adjustment .......................................................................................6 Shelving ...................................
Electrical Requirement • Make sure there is a suitable power outlet (115 volts, 15 amps outlet) with proper grounding to power the wine cellar. • Avoid the use of three plug adapters or cutting off the third grounding in order to accommodate a two plug outlet. This is a dangerous practice since it provides no effective grounding for the wine cellar and may result in shock hazard. Install Limitations • Do not install your wine cellar in any location not properly insulated or heated e.g. garage etc.
Wine Cellar Features and Use Initial Setup • Before connecting the wine cellar to the power source, let it stand upright for approximately 24 hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation. • Once you have plugged the unit into an electrical outlet, let the unit run for at least 30 minutes to acclimate before making any adjustments. Temperature Adjustment • The wine cellar can be set to accommodate your wine storage requirements.
Operating Your Wine Cellar Each wine cellar includes an operating panel on the front of the unit. This operating panel includes several features to operate and control the temperature. 1. Turns the Interior Light ON and OFF 2. Alters the Temperature Display to Fahrenheit or Celsius 3. Displays Temperature 4. Increases Set Temperature 1°F with Each Push 5.
3. Temperatures increase or decrease 1°F with each push of the UP or DOWN button. NOTE: Temperatures may fluctuate depending on whether the interior light is ON or OFF and depending on the position of the bottles. Temperature Settings for Serving Wine Although optimal storage temperature is generally regarded to be 53-57°F, different varietals of wine require different service temperature settings. The recommended temperature ranges for serving different varietals of wine are listed below.
Technical Data Total Volume 3.35 CF Installation Free-Standing Only Voltage & Frequency 115~60Hz Current 1.3A Power Input 85 W Protection Class I Climate Class N Running Amps 1.2A Ambient Temperature 60 - 77°F Refrigerant R134a – 1.6 oz. Temp. Control Range 39°F to 65°F Approx. Net Weight 60 LBS Dimensions 19” x 18.75” x 33.
Proper Wine Cellar Care and Cleaning Cleaning and Maintenance Warning: To avoid electric shock always unplug your wine cellar before cleaning. Ignoring this warning may result in death or injury. Caution: Before using cleaning products, always read and follow manufacturer’s instructions and warnings to avoid personal injury or product damage. General: • Prepare a cleaning solution of 3-4 tablespoons of baking soda mixed with warm water.
• Always move the wine cellar vertically. Do not move with the unit lying down, as possible damage to the sealed system could occur. Note: After moving, wait for 24 hours before plugging in the wine cellar. Troubleshooting Many common issues with your wine cellar can be easily solved. Try the troubleshooting tips below if you experience any problems. Wine Cellar Does Not Operate: • Check if wine cellar is plugged in. • Check if there is power in the AC outlet, by checking the circuit breaker.
Moisture build-up on interior or exterior of the wine cellar: • This is normal during high humidity periods. • Prolonged or frequent door openings. • Check door gaskets for proper seal. Wine cellar door does not shut properly: • Level the wine cellar. • Check for blockages e.g. wine bottles, shelves.
Limited Warranty This Warranty Covers Appliances Within The Continental United States Only. Length of Warranty: This Limited Warranty lasts for one (1) year from date of receipt of purchase of the wine cellar (“Limited Warranty Period”) and the sealed system (compressor, condenser, evaporator) will be covered for three (3) years. Extended warranties may be available for an additional cost at the time of purchase or up to the 30 days from date of purchase.
under this Limited Warranty. Wine Enthusiast reserves the right to substitute materials of substantially similar quality in the event that identical materials are not available at the time the Limited Warranty services are performed. Wine Enthusiast reserves the right to request that purchaser contact a local refrigeration company to service the wine cellar.
