User Manual

6
Wine Cellar Features and Use
Initial Setup
• Before connecting the wine cellar to the power source, let it stand upright for
approximately 24 hours. This will reduce the possibility of a malfunction in the
cooling system from handling during transportation.
• Once you have plugged the unit into an electrical outlet, let the unit run for at
least 30 minutes to acclimate before making any adjustments.
Before You Start
The wine cellar should be placed in a location where the ambient temperature is
between 60-90 degrees Fahrenheit. If the ambient temperature is above or below
this range, the performance of the unit may be affected. For example, placing your
unit in extreme cold or hot conditions may cause interior temperatures to
fluctuate.
Temperature Adjustment
• When the wine cellar is plugged in for the first time, the LED display will show
the factory preset temperature of 61°F.
• The wine cellar can be set to any temperature between 41° and 72°F to
accommodate your wine storage requirements. To set the temperature, press the
up or down arrow button to increase or decrease the temperature setting until the
desired temperature is attained. It may take some time to reach the set
temperature.
Shelving
(Type and number of shelves will vary per model)
Your cabinet was designed to store a maximum number of bottles securely. We
recommend that you observe the tips below to optimize loading:
• Remove packing materials once unit is stable and ready for storage.