Warranty

9
1. Temperature UP, the temperature increases 1°F each time the + button is pressed.
2. Temperature DOWN, the temperature decreases 1°F each time the - button is
pressed.
3. Turns the interior light ON and OFF.
4. Turns the Power ON and OFF.
5. Press the + or - icons simultaneously for 3 seconds to toggle the LED display
between Celsius or Fahrenheit readings.
Before You Start
The wine cellar should be placed in a location where the ambient temperature is
between 61-100 degrees Fahrenheit. If the ambient temperature is above or below
this range, the performance of the unit may be affected. For example, placing your
unit in extreme cold or hot conditions may cause interior temperatures to
fluctuate.
Setting the Temperature Control
NOTE: The temperature readout shows the actual cellar temperature, it will
temporarily show the set temperature while making adjustments, then reverts
back after 5 seconds.
1. Make sure power cord is connected to a properly grounded outlet.
2. Turn power ON.
3. Set the desired temperature by pushing the + or - button.
4. Increase or decrease 1°F with each push of the + or - button.
5. NOTE: Temperatures may fluctuate depending on whether the interior
light is ON or OFF and depending on the position of the bottles.