Product manual
-11-
Commissioning 
your Appliance
5
ENGLISH
The air vacuum system status light   lets you know that your wine is being 
stored in the best conditions when it stops flashing (green indicator light 
permanently on).
If the air vacuum system indicator light 
 is red, refer to chapter 7.
- Vacuum sealing a bottle repetitively can have an impact on the duration of 
preservation of wine.
- To remove the bottle from the appliance, open the compartment door then swivel the 
base of the bottle towards the outside of the compartment.
N.B.: The pump will activate itself again (which is normal) for approximately 10 seconds.
Note: Do not insert corks or any other elements that may obstruct the bottle neck, it must 
be completely clear. Ensure that the bottle is correctly aligned inside the compartment (see 
chapter 5-I Precautions to observe)
2) BRINGING YOUR WINE TO THE CORRECT TEMPERATURE
- To then bring your open bottle to an ideal serving temperature, select the wine mode 
corresponding to your bottle by pressing the 
 button of the compartment concerned 
as many times as necessary. The   red indicator light indicates that the compartment is in 
red wine mode. The   yellow indicator light indicates that the compartment is in white or 
rosé wine mode. When no indicator light is on, the compartment’s serving temperature 
mode is not functioning.
Note: the compartment is still in serving temperature mode. To switch off this mode, press 
the 
 key of the compartment concerned as many times as necessary until the   indicator 
lights turn off.
V – Turning off the appliance / Placing the appliance 
on standby 
Before unplugging your appliance, ensure that the serving temperature mode is not activated 
(red and yellow indicator lights off).
If it is activated, press the 
 keys several times until all the indicator lights on the control 
panel turn off.
Then, to turn off the appliance, simply unplug the mains plug then pull towards you the mobile 
section of the power lead identified by the arrow on the top of the plug. Do not use force.
Note: to place the appliance on standby, press the 
 keys of the two compartments several 
times, until the temperature indicator lights go off.










