Owner Manual

12
Power: Turns the wine cellar system on or off.
Lighting: Turns the interior wine cellar light on or off.
Power/Lighting: Lock/Unlock button.
Temp. Up: Increases temperature by 1°.
Temp. Down: Decreases temperature by 1°.
Before You Start:
The wine cellar should be placed in a location where the ambient temperature
is between 60-80° Fahrenheit. If the ambient temperature is outside this
range, the performance of the unit may be affected. For example, placing
your unit in extreme cold or hot conditions may cause interior temperatures
to fluctuate.
Lock/Unlock
Your wine cellar includes a feature that will lock the control panel if desired.
To lock the wine cellar control panel, touch the power and lighting buttons
simultaneously for 3 seconds. If locked, to unlock the wine cellar control
panel touch the power and lighting buttons simultaneously for 3 seconds.
Setting the Temperature Control
NOTE: The temperature readout shows the actual cellar temperature, it will
temporarily show the set temperature while making adjustments, then reverts
back to the actual temperature after 5 seconds.
1. Make sure power cord is connected to a properly grounded outlet.
2. Turn power ON.
3. The temperature setting range is 50°F – 66°F
4. Set the desired temperature by pushing the Temp UP or DOWN button.
5. Temperatures increase or decrease 1°F with each push of the UP or
DOWN button.
NOTE: Temperatures may fluctuate depending on whether the interior light is ON
or OFF and depending on the position of the bottles.