User manual

USER MANUAL WINE IN25 Page 15
- Press button one second until the targeted temperature is blinking.
- Use button to increase the temperature or
- Use button to lower the temperature.
- When the right temperature is set, press again on button to confirm it.
Explanations of the main display symbols:
Red light = cold mode engaged (compressor working)
Red light = cooling fan high speed
Red light = defrost
Red light = heat mode engaged (resistance)
3.3. Standby mode
- Stanby mode : maintain a 3 seconds pressure on button 1. The compressor
stops and the fan turn at low speed.
- The thermostat indicates « OFF » and also the cellar temperature.
- To come back, maintain again a 3 seconds pressure on button 1.
- The thermostat indicates « ON » during 1 second.
3.4. Automatic defrost
The program of the thermostat will run an automatic defrost time several times a day. During this
operation, the compressor is stopped, only the fan is functioning at low speed. The condensate water
producing during this period will be evacuated through the tube drain.