User manual

USER MANUAL WINE IN25
After transport or maintenance, wait for
on
3. USING THE
WINE CONDITIONING UNIT
The thermostat indicates the temperature in the wine cellar with a precision of 2°C. A temperature change
of the air doesn’t mean the same change of temperature of the liquid due to the
liquid.
The temperature is set at 12°C in the factory.
controlled and adjusted as shown in next paragraph if necessary.
3.1.
Connecting the air conditioner
When you plug
the unit to the electrical socket, the display indicates the temperature of the cellar :
- If the cellar temperature ≥
to the thermostat setting
- If the cellar temperature
≤ to the thermostat setting
works.
The power outlet must be accessible after installation
3.2. Plugging in the
wine conditioning unit
3.2.1.
Temperature setting of the air conditioner WINE IN25
The setting of the targeted
temperature is made on the
Fit the PVC drain and power cable on the
bracket with the sticker clip delivered with the
unit.



The flow must be vertical without loop.


 Important :
After transport or maintenance, wait for
24 hours before switching
on
the air conditioner.
WINE CONDITIONING UNIT
WINEMASTER
The thermostat indicates the temperature in the wine cellar with a precision of 2°C. A temperature change
of the air doesn’t mean the same change of temperature of the liquid due to the
The temperature is set at 12°C in the factory.
During installation the set temperature must be
controlled and adjusted as shown in next paragraph if necessary.
Connecting the air conditioner
WINE IN25
the unit to the electrical socket, the display indicates the temperature of the cellar :
to the thermostat setting
: the fan starts up immediately
≤ to the thermostat setting
: the fan doesn’t start.
The power outlet must be accessible after installation
wine conditioning unit
WINE IN25
Temperature setting of the air conditioner WINE IN25
temperature is made on the
thermostat :
Page 14
Fit the PVC drain and power cable on the
bracket with the sticker clip delivered with the
The flow must be vertical without loop.
24 hours before switching
WINEMASTER
®
The thermostat indicates the temperature in the wine cellar with a precision of 2°C. A temperature change
of the air doesn’t mean the same change of temperature of the liquid due to the
thermal capacity of the
During installation the set temperature must be
the unit to the electrical socket, the display indicates the temperature of the cellar :
: the fan starts up immediately
: the fan doesn’t start.
Only the ventilator
The power outlet must be accessible after installation
.
Sticker clip