User manual

USER MANUAL WINE IN25 Page 12
- Drill 2 holes Ø 155 mm
- Connect the duct to the module
- Bridge the gap between the grid housing and
the wall piercing with insulation material
- Cut the duct corresponding to the installation
- Put together the differents elements with the muff
- Fit the elbow or the sleeve on the air
conditioner nozzle
- Place the clamp and tighten
2.3.2. Examples
4
5
Duct
Clamp
Screwdri-
ver
Elbow PE
Duct
Elbow PE
6
Suction
nozzle
aspiration
Blowing
nozzle
soufflage
Sleeve and elbow PE
Reduction
Telescopic muff
Reduction
Grid
Frame
7
Muff