User guide

33
3. USING THE WINEMASTER AIR-CONDITIONER
The thermostat indicates the temperature in the wine cellar with a precision of 2°C.
A temperature change of the air does not mean the same change of temperature of the liquid due to the thermal
capacity of the liquid.
The temperature is set at 12° C in the factory. During installation the set temperature must be controlled and adjusted
as shown in next paragraph if necessary (paragraph 3.1.2 & 3.2.2 ).
BEFORE MODIFIYING THE TEMPERATURE OF ADJUSTEMENT, TO CHECK IS IT A WINE
C25 (3.1) OR A C25S (SR) (3.2).
3.1 STARTING UP MODEL WINE C25
3.1.1. CONNECTING THE AIR-CONDITIONER
When you plug it into the electrical socket, the air conditioner starts up immediately.
If the temperature in the cellar is higher than the thermostat setting, the compressor starts up immediately.
If the temperature in the cellar corresponds to the setting, only the cellar fan which functions permanently
will start.
3.1.2 SETTING THE TEMPERATURE
The temperature is set on the thermostat as follows:
Press button one second until the set temperature is flashing. Use button to increase
and button to decrease the set temperature. When the setting is right, press button
again to validate it.
- INDICATOR flickering = cold mode on standby
- INDICATOR lit fixed = engaged cold mode (compressor)
- INDICATOR lit fixed = defrost