Manual

P30L User Manual
Revision 1.0
is set, press the mode button for over 5 seconds to exit the setting interface, and the number will
stop blinking or flickering.
3.1 BUTTON DEFINITIONS
Button
Name
Description
MODE
Toggles the active LCD interface in a circular motion
as defined in Sec 3.1.3
UP
Positive (+) parameter adjustments. Holding button
for >5 seconds will reset parameters.
DOWN / LOAD
Negative (-) parameter adjustments. At “MAIN”
interface screen, will turn the LOAD on and off.
3.2 LCD GRAPHIC INDICATORS
LCD Symbol
Description
Stop power supply to LOADs
Supply power to LOADs, No current drawn from Load
Supply power to LOADs, Load is drawing current
Load Icon
Solar Panel Icon
Battery Icon
Load Light Control Icon
Load Timing Control Icon
Page 8 of 16
windynation
01/20/2014