Operation Manual

S.Size
15
S.SIZE
20-7/8”
6-1/2”
30” (36”)(42”)
(1).Mounttherecirculationkittothebottom
ofthecabinet.(Screwsnotincludedwith
recirculationkit)
(2).Aftersecuringtherecirclationkittothe
bottomofthecabinet,makesuretorun
thepathfortheelectricalpowercord.
(3).Beforemountingtherangehood,
besuretoconnecttheelectrical
powercord.Mounttherangehood
usingthescrewsporvidedtothe
bottom(4sides)oftherecirculationkit.
(30” -5pcsscrews)
(36” /42” /48” -9pcsscrews)
(4).Beforepoweringtheunit,makesureall
screwsandpowercordhavebeen
properlyconnected.Afterallconnections
havebeensecuredyourrecirculating
rangehoodisreadyforuse.
Note:Beforemountingtherangehoodandrecirculationkit,pleasemustreferthe
followingfromthemanual.
1.P.5 “ E.PreparingtheRangeHood” removethetopelectricalknockout
(recirculationkitissamestep)
2.P.7 ” .
3.P.8 “ H. ” .
G.Providingelectricalpower”
MountingRangeHoodToCabinet
R.RecirculationKitInstallation(optional)
(2)(1) (3) (4)