User manual

TROUBLESHOOTING
18
TROUBLESHOOTING
WARNING!!!
Check to make sure all power sources are disconnected
before starting any troubleshooting. Safety gloves and glasses
should be worn when working on the unit. Serious injury or death
may occur if safety precautions are not followed.
WS38 Series
Light Issue (All not
turning on)
1. New Transformer replacement is required.
Night Light ( Not
working)
1. Sensor may be defective, replacement is required.
Light Issue (One light
not turning on)
1. Replace defective fixture with new fixture.
Filters Jammed 1. Filters may have been place under oil tray.
Burnt/melted control
switch
1. Complete Control switch replacement is required.
Speed levels not
working correctly
1. Complete Control switch replacement is required.
Unit lacking smoke
intake
1. Make sure a reducer has not been installed.
Unit showing no power
indication
1. Make sure the power source is working properly.
2. All wiring is connected.
Unit making humming
noise
1. Replace defective capacitor.