Specifications

I. Replace the LED LightI. Replace the LED Light

Before replacing LED light ensure the unit is switched off, when you want to

change the LED light, please always wear working gloves.

1. Using suitable tool (small slotted screw driver) gently pry off the LED light set.

2. Taking off the wire connecter with LED light set.

3. Replace a new LED light set and reconnect the wire to the connector.

4. Before push back the original LED light position, test the LED light.

NOTE : For LED light replacement, you may not find the appropriate LED lights from

market, please contact with distributor(s)/dealer(s).

LED light: 1W

Model: HP-15A

LED driver:

Model: HP1500-36

input: 100~240vdc

output: 3.6vdc=1500maH