Specifications

Apply with eight (3/16" x 3/8" ) screws (included) to fix the

two hood-mounting brackets (included) to the back of

the hood. (Fig.16 )

Mark the desired position of the duct cover mounting

bracket on the wall. Fix and secure duct cover mounting

bracket with two screws (not included). (Fig.17 )

RA-35 Series

Apply with aluminum or steel pipe to connect the plastic

exhaust duct on the hood. Use duct tape to make all joints

secure and ensure air tight. (Fig.18 )

Slide the inner duct cover up 2 inches before sliding the

entire duct cover on the hood. (Fig.19 )

1. Adjust the height of the inner duct cover to the duct

cover-mounting bracket. Secure the inner duct cover

withtwo(4x8mm)screws(included) (Fig.20 )

2. Fasten out duct cover to plastic plate on the hood with

four(4x8mm)screws(included) (Fig.20 )

RA-33/RA-34 Series

Fig.16

Fig.17

Fig.18

Fig.19

Fig.20

Hood-Mounting Brackets

7” Round Adapter

Aluminum or

Steel Pipe

Duct Tape

6” Round

Plastic Exhaust