Specifications

RISK OF ELECTRICAL SHOCK. THIS RANGE HOOD MUST BE PROPERLY
GROUNDED. MAKE SURE THIS IS DONE BY SPECIALIZED ELECTRICIAN
IN ACCORDANCE WITH ALL APPLICABLE NATIONAL AND LOCAL
ELECTRICAL CODES. BEFORE CONNECTING WIRES, SWITCH POWER OFF
AT SERVICE PANEL AND LOCK SERVICE PANEL TO PREVENT POWER
FROM BEING SWITCHED ON ACCIDENTALLY.
Connect the electrical wires.
- Connect three wires (black, white and green) to house wires and
cap with wire connectors. Connect according to color:
black to black, white to white, and green to green as shown on
Figure A.
- If necessary to hide the electrical wire connections, push wires
back into the wiring box. Access the wire connections underneath
the hood. Make sure wires do not slip between motor or any
moving parts to prevent any damage.
SAFETY WARNING
8
WIRING TO POWER SUPPLYWIRING TO POWER SUPPLY
Figure. A
Wire Connector