Walk Behind Scrubber Operating Instructions

MAINTENANCE
CUTTER 36V 86039100 05/01/07
4-1
SERVICE SCHEDULE
MAINTENANCE DAILY WEEKLY MONTHLY 50
HRS
100
HRS
200
HRS
Check batteries after charging; add water if
necessary
*
Check pad wear to prevent buildup of
chemicals
*
Check linkages and connectors for wear and
damage
*
Check hoses for wear, blockages, or damage
*
Clean squeegee; check for adjustment;
inspect for wear
*
Check handles, switches, knobs, domes, and
gaskets for damage
*
Clean out recovery tank
*
Clean out solution tank; remove and clean
screen
*
Clean outside of all tanks; check for damage
*
Run vac motor for at least one minute to
allow motor to dry
*
Store with dome off tank to allow the tank to
dry
*
Check scrub deck splash skirt
*
Check batteries for corrosion, cracks and
evidence of overheating
*
Check all bearings for noise
*
Check all gaskets for wear and leakage
*
Check vac motor carbon brushes
*
Check brushes for wear; ensure bristles are
not damaged
*
Check linkages for wear and damage
*
Grease wheels and casters
*
Grease axle
*
Check squeegee blades for wear and frame
for damage
*
Check overall performance of machine
*
Lubricate squeegee caster
*
Clean batteries and terminals
*
Thoroughly clean the machine
*
Check carbon brushes in all vacuum, brush
drive, and propel motors
*
Blow out dust in motors
*
Inspect motor commutators
*
Clean chains, cables and pulleys
*
Clean pivot points on squeegee and scrub
deck linkages
*