Specifications

WWW.MANUALS.WS
WWW.MANUALS.WS
PROPEL HANDLE ASSEMBLY
VGR2 98953 10/19/02
15
REF PART NO. QTY DESCRIPTION
SERIAL NO.
FROM
NOTES:
1 27551 1 COVER, PROPEL HANDLE
2 70406 4 SCREW, 10B X 3/8 PHSM BLK
3 87018 4 WASHER, #10 X 9/16 OD
4 57236 2 NUT, 10-32 HEX NYLOCK BLK
5 71116 1 SUPPORT, LEVER PIVOT
6 67271 2 ROD, HANDLE LEVER PILOT
7 51186 2 LEVER, PROPEL CTRL HANDLE
8 66184 1 PIN, CLEVIS 1/4 X 2.438
9 62705 1 PLATE ASSEMBLY, PROP. CTRL.
10 70209 2 SCR, 10-32 X 1.75 PHMS
11 36136 1 GUIDE, LEVER CENTERING
12 14866 2 BUSHING, PROPEL CONTROL
13 73236 1 SPRING, COMP. .36D X .12L X .04W
14 66191 1 PIN, CLEVIS 3/16 X 1/2
15 80604 2 RING, RUE COTTER 1/4”
16 72087 1 SWITCH, 36VDC SPST ILLUM.
17 57028 4 NUT, 10-24 TINNERMAN
18 48043 1 KNOB, PT26/32 SPEED CONTROL
19 880092 1 WIRE ASM, HANDLE TO POWER
20 57024 1 NUT, 3/8-27 PANEL
21 70084 1 SET SCREW, 8-32 X 3/16 KCP
22 66183 1 PIVOT, POTENTIOMETER
23 36123 2 GRIP, CLP HANDLE, X 9.5”
24 51184 2 LOCK, HANDLE ADJUSTMENT
25 70228 4 SCREW, 10-32 X 1/4 PHSM
26 38183 1 HANDLE, VGRB MAIN
27 88748 1 WIRE ASM., VGR. HANDLE
28 27554 1 CONN., MOLEX 6 PIN RECEPT. (M)
29 70088 4 SCR, 10-32 X 1/2 PPHMS
30 87016 6 WASHER, #10 LOCK EXT. STAR
Installation and adjustment of potentiometers for drive control speed
STEP PROCEDURE
1 Turn the speed potentiometer fully clockwise. (Max. speed)
2 Measure the potentiometer resistance at connector (#27) BROWN and BLACK wires.
The resistance should measure 2200-2800 ohms in neutral, 4800-5000 ohms in forward,
and 0-200 ohms in reverse. If adjustment is necessary loosen set screw (#21) and adjust
potentiometer T for 2500 ohms in Neutral. Tighten set screw (#21).
3 Turn the main switch power on.
4 If the machine moves when control lever is in neutral adjust the direction potentiometer
until movement stops.