User Guide

TECHNICAL SPECIFICATIONS

SABER (SC) 86038350 01/29/07

3-1

ITEM DIMENSION/CAPACITY

Nominal power – non-traction model 1100 W

Nominal power – traction model 1200 W

Rated Voltage 24VDC

Rated Amperage – non-traction model 45 Amps

Rated Amperage – traction model 50 Amps

Batteries 2 x 12 Volt 105-130-195 AH @

20hr rate

Scrub Brush Motor .75 hp (0.56 kW)

Vacuum Motor .75 hp (0.56 Kw)

Propelling Motor – traction model .38 hp (0.28 Kw)

Mass (GVW) – non-traction model 543 lbs. (246.5 kg)

Mass (GVW) – traction model 556 lbs. (252.4 kg)

Weight empty without batteries – non-traction model 213 lbs. (96.1 kg)

Weight empty without batteries – traction model 232 lbs. (105.3 kg)

Solution Control – non-traction model Gravity feed, fully variable

Solution Control – traction model Gravity feed, fully variable with

automatic shut-off in neutral

Solution tank capacity 13 gal. (50 l)

Recovery tank capacity 16 gal. (60 l)

Scrub brush diameter 20 in (51 cm)

Scrub brush pressure – non-traction model 50 lbs. (23 kg)

Scrub brush pressure – traction model 100 lbs. (45 kg)

Scrub brush speed 200 rpm

Tires – non-traction model 2 x 8 in (20 cm) thermoplastic

elastomer non-marking

Tires – traction model 2 x 8 in (20 cm) foam filled non-

marking

Casters 3.5 x 1.25 in (9 cm) polyurethane

solid non-marking

Foundation Pressure – non-traction model 105 lbs./in

( 725 kPa)

Foundation Pressure – traction model 46 lbs./in

( 315 kPa)

Maximum Speed – traction model 2.75 miles/hour (4.5 km/hour)

Coverage 9500 ft

/hour at 2 mph with

2 in. overlap

Frame Construction Steel with epoxy powdercoat

finish.

Minimum aisle u-turn width 45 in. ( 114.3 cm)

Maximum rated climb and descent angle with empty tanks 2%

Maximum rated climb and descent angle with full tanks 2%