Operating instructions

INFLEXION
TM
TP-4976401-B 1-1
January 2014
CHAPTER 1
INTRODUCTION
1.1 SAFETY PRECAUTIONS
Refer to the Safety Summary for precautions to be observed while operating or servicing this equipment.
1.2 DOCUMENT INTRODUCTION
This document covers installation, operation, maintenance, and troubleshooting for the INFLEXION masts. The
manual should be reviewed in its entirety. Contact the Will-Burt factory with any questions before performing any
procedures outlined in this manual. The INFLEXION
TM
1.5, 2.3, 4.5, 6.0, and 7.5 masts will be referred to as the
“INFLEXION” mast in this manual.
1.3 INFLEXION DESCRIPTION
The INFLEXION mast is a transportable platform elevation system which serves as a platform for communications
antennae, camera, and other payloads. The unit is designed for installation on any vehicle for the purpose of
providing temporary communications, or surveillance. See Figure 1-1 for identification of the major components of the
INFLEXION mast.
Figure 1-1 INFLEXION Mast Major Components (INFLEXION 4.5, model 720378040 shown)
Base Covers (base board
and actuator inside)
Mast
Optional Nycoil
Saddle
Platform
Top Three
Not Used
Compressor
Exhaust
DC Power In or
Handheld Controller