Operating instructions

98295 7/1/97 7
HANDLE ASSEMBLY Parts List
Ref Part No. Qty Description
Serial No.
Notes:
From To
1A 14700 1 Breaker 15A 250VAC 50VDC
M17,M20,M20X,MDS20,M320 M17X
1B 14668 1 Breaker, 8A Circuit M13
1C 14312 1 Breaker, 7A Circuit All 230V ”I” machines.
2 27558 1 Collar, Circuit Breaker
3 50649 1 Label, Circuit Breaker
4 14942 1 Boot, 3/8 circuit breaker
5 70384 4 Scr, 1/4-20 x 1/2 PHTR Pltd.
6 57006 2 Nut, 1/4-20 Hex Pltd
7A 41234 2 Housing, POL Handle (Logo) Qty.1 on 230V ”I” machines.
7B 41246 1 Housing, POL Handle Rear Mach’d
Used on 230V ”I” machines only.
8 51188 1 Lever, Height Polisher Handle
Installed for optional Sol. tank.
9 66187 3 Pin, POL Handle
10 51187 2 Lever, Switch Polisher Handle
11 36139 2 Grip, Handle
12 51192 1 Lock, Switch Lt. POL Handle
13 51191 1 Lock, Switch Rt. POL Handle
14 73571 2 Spring, Handle Lock
15 70242 2 Scr, 4-40 x 1/4 PHMS Pltd.
16 70451 2 Scr, 1/4-20 x 1.62 SHCS Pltd
17 70455 2 Scr, #6-32 x 1.00 PPHTF Pltd.
18 73400 1 Spacer, UL Switch Used on 115V machines only.
19 73402 1 Spacer, Adj. Handle
20A 72123 1 Switch, 25A SPST 125-250V Snap All 115V machines.
20B 72119 1 Switch, Snap POL Handle 230V All 230V ”I” machines.
21 70351 1 Scr, 10-32 x 3/8 HHTR w/Star
22 20054 1 Clamp, 3/8 Nylon UL/CSA
23 70335 1 Scr, 10-32 x 1/2 PHTR Grn/Grnd
24 87016 1 Washer, #10 Lock Ext Star SS
25 57003 1 Nut, Yellow Wire All 115V machines.
26 99627 1 Electric Tape, 3/4 w/UL-CSA All 115V machines.
27A 23167 1 Cord Set, 14/3 Std x 50’ Yellow All 115V machines.
27B 23169 1 Cord Set, 1.5mm Euro x 50’ Blk All 230V ”I” machines.
28 78288 1 Tube, Polisher Handle Merit
29 73572 1 Spring, Switch Handle
30 62251 1 Plate, Handle Lever
31 62344 1 Plate, Lever Plug
32 78270 1 Tube, Handle Polisher
33 66199 2 Pin, Polisher Handle
34 76112 1 Terminal Block, 3 position All 230V ”I” machines.
35 87067 1 Washer, 5/16 lock int star plt.
36 87025 2 Washer, 1/4 lock ext star