Operating instructions

ManualsBrandsWindsor ManualsPower ToolsL175

INDUSTRIES, INC., 1351 W. Stanford Ave., Englewood CO 80110 USA *303-762-1800*FAX

303-762-0817

MERIT

FLOOR POLISHER

Owner’s Guide

REV.

98295 7/1/97

MERIT

1 Warnings - Product Description

2 Operation / Maintenance / Service

3 Troubleshooting

4Main Assembly

6 Handle Assembly

8 Wiring Diagrams

9 Optional Equipment & Notes

10 Warranty

Contents:

Record model and serial number located on data label.

Refer to these numbers when calling Windsor dealer for

parts or service.

MODEL :

SERIAL NO. :

PURCHASE DATE :

WARNING OF

POTENTIAL INJURY:

This product contains moving parts. To

reduce the risk of injury unplug the

machine before servicing.

Whenever repairs are made ensure electrical

connections are correct and wiring matches

APPROPRIATE diagram before plugging

machine into an electrical outlet.

CAUTION:

1.) See the Owner’s Guide for

complete operating instructions.

2.) Maintenance and repairs must onlybe done

by qualified personnel.

3.) Using non-Windsor parts to repair this

machine will void the warranty.

Order Parts Here:

www.ivie-ent.com/parts

Ph:(918)254-5161

Summary of content (9 pages)

PAGE 1
MERIT FLOOR POLISHER TM Owner’s Guide Contents: 1 Warnings - Product Description 2 Operation / Maintenance / Service 3 Troubleshooting 4 Main Assembly 6 Handle Assembly 8 Wiring Diagrams 9 Optional Equipment & Notes Order Parts Here: www.ivie-ent.com/parts Ph:(918)254-5161 WARNING OF POTENTIAL INJURY: 10 Warranty This product contains moving parts. To reduce the risk of injury unplug the machine before servicing.
PAGE 2
INSPECTION OPERATION Please carefully unpack and inspect your machine for shipping damage. Each unit is operated and thoroughly inspected before shipment, and any damage is the responsibility of the delivering carrier who should be notified immediately. CAUTION: For Indoor Use Only. To prevent possible damage to the floor when using the Brush option, use water or other approved cleaning solution while operating. When using the pad optioin, always keep the machine moving when in contact with the floor.
PAGE 3
TROUBLE SHOOTING CHART PROBLEM No power to machine Electrical shock Circuit breaker tripping POSSIBLE CAUSE SOLUTION Dead electrical circuit breaker or fuse box. Check building circuit Power switch failure Test switch for continuity and replace if necessary. Faulty circuit breaker Replace. Faulty power cord Replace. Equipment not grounding Follow grounding instructions exactly. Receptacle not grounded Have an electrician inspect building’s wiring.
PAGE 4
MAIN ASSEMBLY 16 See asm. below A 8 9 7 32 10 31 17 5(3) 4AB 18 33(2) 19(2) 12 38 39 11 35 15 8 22 23 6AB 1ABCE FGHK 13ABC 20 14 2ABC 9 8 20 21 8 10 7 3ABC Optional Pad Driver shown. See Page 9 ”Optional Equipment” for additional options.
PAGE 5
MAIN ASSEMBLY Parts List Ref Part No.
PAGE 6
HANDLE ASSEMBLY 5 16 36 34 36 7A 27B 20B 11 13 230V Switch and Terminal Block Asm 14 15 33 15 14 24 12 32 11 10 24 23 20A 21 33 17 29 26 9 25 10 22 27A 19 9 30 31 8 28 18 1ABC 35 A 7A (On 115V machines) 7B (On 230V ”I” machines) 2 3 6 4 5 5 6 98295 7/1/97
PAGE 7
HANDLE ASSEMBLY Parts List Ref Part No. Qty 1A 1B 1C 2 3 4 5 6 7A 7B 8 9 10 11 12 13 14 15 16 17 18 19 20A 20B 21 22 23 24 25 26 27A 27B 28 29 30 31 32 33 34 35 36 14700 14668 14312 27558 50649 14942 70384 57006 41234 41246 51188 66187 51187 36139 51192 51191 73571 70242 70451 70455 73400 73402 72123 72119 70351 20054 70335 87016 57003 99627 23167 23169 78288 73572 62251 62344 78270 66199 76112 87067 87025 1 1 1 1 1 1 4 2 2 1 1 3 2 2 1 1 2 2 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 2 1 1 2 Serial No.
PAGE 8
WIRING DIAGRAMS 115V Diagram Single Speed 230V Diagram Single Speed (All models except MDS20) (All models except MDS17I, MDS20I) 115V Diagram Dual Speed 230V Diagram Dual Speed (MDS20 only) 8 (MDS17I, MDS20I) 98295 7/1/97
PAGE 9
OPTIONAL EQUIPMENT PART #DESCRIPTION Come equipped with clutch plate 02220 02216 02218 02219 02217 02236 02235 02206 02241 02205 02203 02238 02202 Clutch Plate Pad Driver, 12” Merit Pad Driver, 16” Merit Pad Driver, 19” Merit Pad Driver, 19” Merit high speed Brush, 11” Polypropylene Brush, 11” Malgrit Brush, 15” Polypropylene Brush, 15” Malgrit Mild Brush, 15” Malgrit Aggresive Brush, 18” Polypropylene Brush, 18” Malgrit Mild Brush, 18” Malgrit Aggresive *Contact your local WINDSOR Distributor to order