Operating instructions

TROUBLE SHOOTING CHART :
PROBLEM POSSIBLE CAUSE SOLUTION
No power to Dead electrical circuit Check building circuit
machine breaker or fuse box.
Power switch failure
Faulty circuit breaker Replace.
Faulty power cord Replace.
Test switch for continuity and replace
if
necessary.
Electrical shock Equipment not
grounding Follow grounding instructions exactly.
Receptacle not
grounded
Have an electrician inspect building’s
wiring.
Internal wiring
problem Ensure that the machines wiring
matches the appropriate wiring diagram.
Replace any wires or components which
are short circuiting.
Circuit breaker Faulty circuit breaker Test circuit breaker for continuity.
tripping Replace circuit breaker if necessary.
Mechanical problem Higher amp draws indicate a mechanical
problem, find the parts which are not
moving
as freely as they should, and repair
or replace.
NOTES:
TM
LJ75
Rev.1 5/2/94
9