iSCRUB Operating Instructions (ENG) MODELS: CS24 10060210 CSE24 10060250 CS24SP 10060220 CSX24 10060270 CSXE24 10060290 CSE24SP 10060260 CSXEO24 10060300 Read these instructions before using the machine DT 86037660 10/20/11
MACHINE DATA LOG/OVERVIEW MODEL _______________________________________ DATE OF PURCHASE __________________________ SERIAL NUMBER ______________________________ SALES REPRESENTATIVE # _____________________ YOUR DEALER Name: __________________________________________________________________________________________________ Address: _______________________________________________________________________________________________ Phone Number: __________________________________________________________________
TABLE OF CONTENTS Machine Data Log/Overview. ...............................2 Table Of Contents ................................................3 HOW TO USE THIS MANUAL How To Use This Manual.....................................1-1 SAFETY Important Safety Instructions ............................ 2-1 Hazard Intensity Level....................................... 2-2 Safety Label Location........................................ 2-3 OPERATIONS Technical Specifications....................................
HOW TO USE THIS MANUAL This manual contains the following sections: - HOW TO USE THIS MANUAL SAFETY OPERATIONS MAINTENANCE PARTS LIST The HOW TO USE THIS MANUAL section will tell you how to find important information for ordering correct repair parts. Parts may be ordered from authorized Windsor dealers. When placing an order for parts, the machine model and machine serial number are important. Refer to the MACHINE DATA box which is filled out during the installation of your machine.
IMPORTANT SAFETY INSTRUCTIONS When using an battery powered appliance, basic precaution must always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE. To reduce the risk of fire, electric shock, or injury: Use only indoors. Do not use outdoors or expose to rain. Use only as described in this manual. Use only manufacturer’s recommended components and attachments.
HAZARD INTENSITY LEVEL The following symbols are used throughout this guide as indicated in their descriptions: HAZARD INTENSITY LEVEL There are three levels of hazard intensity identified by signal words -WARNING and CAUTION and FOR SAFETY. The level of hazard intensity is determined by the following definitions: WARNING - Hazards or unsafe practices which COULD result in severe personal injury or death.
SAFETY LABEL LOCATION NOTE: These drawings indicate the location of safety labels on the machine. If at any time the labels become illegible, promptly replace them. 86244300 PRV NO. 500955 WARNING LABEL 86252520 PRV NO.
TECHNICAL SPECIFICATIONS ITEM Nominal power Rated Voltage Rated Amperage Batteries Battery Compartment Dimensions Scrub Brush Motors - Disk Machine Scrub Brush Motors - Cylindrical Machine Vacuum Motor(s) Maximum flow rate of vacuum motor Maximum suction of vacuum motor Propelling Motor Mass (GVW) Weight empty without batteries Solution Control Solution capacity Recovery capacity Scrub brush diameter - Disk Machine Scrub brush diameter - Cylindrical Machine Scrub brush pressure Scrub brush speed - Disk Mach
TECHNICAL SPECIFICATIONS ITEM Height Length Width without squeegee Width of squeegee - Disk Machine Width of squeegee - Cylindrical Machine Width of scrub path - Disk Machine Width of scrub path - Cylindrical Machine MEASURE 50.6 inches (1285 mm) 52.5 inches (1330 mm) 26.5 inches (670 mm) 32.7 inches (830 mm) 29 inches (737 mm) 24 inches (610 mm) 23 inches (585 mm) LENGTH WIDTH HEIGHT SPECIAL NOTES: The sound pressure level at the operator’s ear was measured to be 68 dBA.
HOW THIS MACHINE WORKS The Chariot® is a battery powered, self-propelled, hard floor scrubber intended for commercial use. The appliance applies a cleaning solution onto a hard floor, scrubs the floor with brushes, and then vacuums the soiled water back into the recovery tank. The machine's primary systems are the solution system, scrub system, recovery system, and operator control system. The function of the solution system is to store cleaning solution and deliver it to the scrub system.
COMPONENTS 2 1 7 3 11 5 6 12 10 4 9 8 1. 2. 3. 4. 5. 6. Control Panel-Drive Control Panel-Scrub Control Housing Pedal Platform Rear Cover Tank 7. 8. 9. 10. 11. 12.
DRIVE CONTROLS 10 (Basic) 2 8 6 3 1 7 11 (Basic) 9 5 3-5 4 86037660 CHARIOT 11/09/06
DRIVE CONTROLS 1. 2. 3. 4. 5. 6. 1. Key Switch Emergency Stop/Brake Switch Directional Control Switch Throttle Pedal Operator Presence Pedal Speed Control Switch 7. 8. 9. 10. 11. Drive Reset Button Horn Button Steering Wheel Battery Discharge Indicator (Basic Only) Hour Meter (Basic Only) KEY SWITCH Controls the power for machine functions. To turn the machine power on, rotate key clockwise. To turn the machine off, rotate key counterclockwise.
DRIVE CONTROLS 6. SPEED CONTROL SWITCH Controls the maximum speed of the machine. There are two setting intended for scrubbing, speeds 1 and 2. Speed 3 is recommended for transport only, not scrubbing. To increase speed, press the top of the switch. To decrease speed, press bottom of the switch. Speeds can be adjusted at any time, whether machine is moving or not. Basic: The position of the switch indicates speed setting. Deluxe: The display indicates speed setting.
DRIVE CONTROLS 10A. BATTERY CHARGE LEVEL INDICATOR-BASIC Indicates the charge level of the batteries. The meter display is divided into 10 vertical bars. Bars illuminated on the far right indicate full charge. Bars flashing near the left side indicate the batteries should be recharged. Further operation of the machine could damage the machine or the batteries. When the machine is left overnight with less than a full charge, the display may initially indicate a full charge.
SCRUB CONTROLS-BASIC AND CYLINDRICAL 4 2 3 1 1. 2. 3-9 Squeegee Lift Lever Scrub Deck Actuator Switch 3. Brush Pressure Indicator 4.
SCRUB CONTROLS-BASIC-CYLINDRICAL 1. SQUEEGEE LIFT LEVER Raises and lowers the squeegee, and turns the vacuum motor on and off. To lower squeegee and start vacuum motor, lift the lever from its raised position. To raise squeegee and stop vacuum motor, lift the lever from its lowered position. 2. ACTUATOR SWITCH Raises and lowers the scrub deck, turns the scrub brush motors on and off, and adjusts the amount of brush/pad pressure to the floor.
SCRUB CONTROLS-DELUXE 5 1 4 1. One Touch Switch 2. Solution Control Switch 3. Brush Pressure Switch 3 2 4. Vacuum/Squeegee Switch 5. Display Toggle Switch 1. ONE TOUCH SWITCH This switch controls the scrub brushes and vacuum all in one touch. To start scrubbing, press the one touch switch. The brush drive motors will turn on, the scrub deck will lower to the "light scrub" position, the solution will flow at “one bar” rate, the squeegee will lower and the vacuum will turn on.
SCRUB CONTROLS-DELUXE 2. SOLUTION CONTROL SWITCH This switch controls the amount of solution flow to the scrub deck. The information screen will show the solution setting. There are 4 different flow settings. To increase the solution flow, press the bottom of the solution control switch (+). To decrease solution flow, press the top of the switch (-).
SCRUB CONTROLS-SQUEEGEE 1 2 2 DISK SCRUBBER CYLINDRICAL SCRUBBER 1. Squeegee Deflection Adjustment Knobs 2.
SCRUB CONTROLS-SQUEEGEE 1. SQUEEGEE DEFLECTION ADJUSTMENT KNOBS Adjusts the deflection along the entire length of the squeegee. To increase squeegee blade deflection, turn the two knobs at the ends of the squeegee counterclockwise. To decrease squeegee deflection, turn the two knobs at the ends of the squeegee clockwise. 2. SQUEEGEE PITCH ADJUSTMENT ROD (DISK SCRUBBER) Adjusts the deflection at the ends of the squeegee. To increase squeegee blade deflection at the ends, turn rod counterclockwise.
MACHINE OPERATION PRE-RUN MACHINE INSPECTION EMERGENCY STOP PROCEDURES Do a pre-run inspection to find possible problems that could cause poor performance or lost time from breakdown. Follow the same procedure each time to avoid missing steps. 1. Release the throttle pedal by lifting right foot. NOTE: See maintenance section for pre-run machine inspection checklist items. 3. If an electrical problem is suspected, push in emergency stop button.
MACHINE OPERATION FILLING SOLUTION TANK NORMAL SCRUBBING FOR SAFETY: Before leaving or servicing machine; stop on level surface, turn off machine and remove key. Plan the scrubbing pattern in advance. The longest track is around the perimeter of the area to be cleaned. For efficient operation, the runs should be the longest possible without turning, stopping, or raising or lowering scrub deck/squeegee. 1. Turn the machine power off. 2. Remove solution cover. 3.
MACHINE OPERATION TO BEGIN SCRUBBING PRIMING PUMP When operating the machine around people, pay close attention for unexpected movement. Use extra caution around children. If the solution system has gone dry or has been unused for a period of time, it may be necessary to follow the pump priming procedure. Flammable liquids and/or reactive metals can cause explosions or fire! Do not pick up. 1. Fill solution tank. 1. Place left foot on operator presence pedal.
MACHINE OPERATION TO STOP SCRUBBING DOUBLE SCRUB 1. BASIC AND CYLINDRICAL For floors which are heavily soiled or have thick accumulations of floor finish may not clean sufficiently with one pass. In these cases it will be necessary to double scrub. To double scrub, make the first pass over the surface being cleaned with the squeegee up, vacuum off, the solution on, Aqua-Mizer removed and brushes down.
MACHINE OPERATION SOLUTION TANK 1. Pull recovery drain hose out to expose the solution drain hose. 2. Pull the solution drain hose from under front of the tank. Unscrew the T-handle on plug enough to loosen plug, then lower hose in direction of drain. Slowly remove plug from drain hose. 3. Remove the solution tank cover. SOLUTION DRAIN HOSE RECOVERY DRAIN HOSE 4. Flush the solution tank out with clean water and run several gallons of clean water through systems.
NOTES: 86037660 CHARIOT 11/09/06 3-20
MAINTENANCE SERVICE SCHEDULE MAINTENANCE Check water level of batteries after charging; add distilled water if necessary. (Wet cell only) Check that dome and cover seal tightly. Visually check for damaged or worn tires. Check brushes or pads for proper installation. Check vacuum hose connections. Check that squeegee is securely attached and properly adjusted. Check for securely attached drain hoses, plug and cap. Check both pedals, brake and steering for proper operation.
MAINTENANCE-BATTERIES 1 2 3 4 5 6 1. 2. 3. Rear Cover Retainer Knob Rear Cover Battery Connector-Machine 4. 5. 6.
MAINTENANCE-BATTERIES When servicing machine, avoid contact with battery acid. BATTERIES (WET CELL ONLY) The batteries provide the power to operate the machine. The batteries require regular maintenance to keep them operating at peak efficiency. The machine batteries will hold their charge for long periods of time, but they can only be charged a certain number of times. To get the greatest life from the batteries, charge them when their charge level reaches 25% of a full charge.
MAINTENANCE-BATTERIES CHECKING BATTERY SPECIFIC GRAVITY CHARGING BATTERIES Use a hydrometer to check the battery specific gravity. When servicing machine, avoid contact with battery acid. Batteries emit hydrogen gas. Explosion or fire can result. Keep sparks and open flame away. Keep covers open when charging. Battery Check Wear eye protection and protective clothing when working with batteries. Charge batteries in a well ventilated area. CHECKING GRAVITY A. Hydrometer B.
MAINTENANCE-BATTERIES 5. Replace the battery caps, and leave them in place while charging. 6. Unplug the battery connector from the machine. FOR SAFETY: When charging, connect the charger to the batteries before connecting the charger to the AC wall outlet. Never connect the charger to the AC wall outlet first. Hazardous sparks may result. 7. Plug the charger connector into the battery connector. Connect the charger AC plug to a wall outlet.
MAINTENANCE-SQUEEGEE 1 2 3 4 5 6 4 DISK SCRUBBER 1. 2. 3. 6 CYLINDRICAL SCRUBBER Squeegee Squeegee Deflection Adjustment Knobs Squeegee Level Indicator 4. 5. 6.
MAINTENANCE-SQUEEGEE SQUEEGEE BLADES TO REMOVE SQUEEGEE ASSEMBLY The front squeegee blade allows solution to pass through channels in the blade into the squeegee assembly while maintaining vacuum to provide lift. The front blade has four wear surfaces and can be rotated for extended life. The front blade should not require regular replacement under normal use. 1. With the squeegee in the up position, turn key switch “OFF”. The rear blade wipes the floor to a near dry condition.
MAINTENANCE-SQUEEGEE TO ADJUST SQUEEGEE PITCH TO ADJUST AMOUNT OF REAR SQUEEGEE DEFLECTION 1. Choose a smooth, level surface. Turn “ON” the key switch. Lower the squeegee and drive forward at least 2 feet (60cm.). 2. With the squeegee down, stop the machine. Do not allow machine to roll back. FOR SAFETY: Before leaving or servicing the machine; stop on level surface, turn off machine and remove key. 3. Determine the differences, if any, in deflection of the squeegee blade between each end and the middle.
MAINTENANCE-SCRUB BRUSHES SCRUB BRUSHES FINISHED FLOORS There are four different types of brushes available to cover applications from cleaning heavily soiled floors to polishing. A pad driver is also available to take advantage of the many cleaning pads on the market. Please refer to the following to assist in selecting the proper brush or pad for the work at hand. Nylon bristles are used in a variety of applications on coated or uncoated surfaces.
MAINTENANCE-SCRUB DECK – DISK 4 3 1 2 5 6 1. Scrub deck Aqua-Mizer™ 2. Aqua-Mizer™ retainer knob 3. Scrub deck skirt 4. Scrub deck skirt stop 5. Scrub brush motor 6.
MAINTENANCE-SCRUB DECK - DISK Do not use a pressure washer to clean around the brush motors. Use tap pressure only. BRUSH MOTOR CARBON BRUSH REPLACEMENT TO REPLACE SCRUB BRUSH MOTORS 1. Scribe alignment mark on motor barrel to motor cap. Remove two bolts. 1. With the scrub deck in the raised position, disconnect brush motor wiring connector from harness. 2. Remove end cap from motor. NOTE: Motors contain two wave washers in cap. Do not lose these. 2.
MAINTENANCE-SCRUB DECK - DISK SCRUB DECK ACTUATOR ADJUSTMENT FOR SAFETY: Before leaving or servicing machine, stop on a level surface. Turn off machine. The actuator will need to be adjusted when replaced. To adjust the actuator: 1. Remove the two screws that secure actuator spring plate and pull actuator barrel from stud on actuator spring bracket. 2. Remove clevis pin from upper bracket of actuator. 3. Disconnect actuator from wiring harness. 4. Reverse steps to install. 1.
MAINTENANCE-SCRUB DECK - CYLINDRICAL 6 7 1 4 1. 2. 3. 4. 4-13 4-13 Hopper Blade side squeegee Side squeegee adjustment knob Scrub brush motor 2 3 5 5. Scrub deck lift actuator 6. Side squeegee removal knob 7.
MAINTENANCE-SCRUB DECK - CYLINDRICAL SCRUB HEAD-CYLINDRICAL SCRUB BRUSH REPLACEMENT The dual cylindrical scrub head is designed to eliminate debris that may be caught in the squeegee while scrubbing. Water is applied to the first scrubbing brush turning in a clockwise rotation when viewed from the right of operator’s side of machine. The first brush scrubs dirt and debris between the brushes.
MAINTENANCE-SCRUB DECK - CYLINDRICAL DUMPING HOPPER ADJUSTMENT OF INDIVIDUAL BRUSHES The removable hopper is located behind the rear scrub brush. If the hopper becomes full, it will not accept any more debris. Loosen knob on left side squeegee and swing open. Remove the hopper by sliding it out from the operator’s left side of the machine. The hopper can then be dumped from the top. Flush the hopper clean with running water. The brush pattern is adjusted from the motor side only of both brushes. 1.
MAINTENANCE-SCRUB DECK - CYLINDRICAL Do not use a pressure washer to clean around the brush motors. Use tap pressure only. BRUSH MOTOR CARBON BRUSH REPLACEMENT TO REPLACE SCRUB BRUSH MOTORS 1. Scribe alignment mark on motor barrel to motor cap. Remove two bolts. 1. With the scrub deck in the raised position, disconnect brush motor wiring connector from harness. 2. Remove end cap from motor. NOTE: Motors contain two wave washers in cap. Do not lose these. 2. Remove side squeegee assembly. 3.
MAINTENANCE-SCRUB DECK - CYLINDRICAL ACTUATOR SCRUB DECK REMOVAL/REPLACEMENT SCRUB DECK ACTUATOR ADJUSTMENT FOR SAFETY: Before leaving or servicing machine, stop on a level surface. Turn off machine. 1. Lower scrub deck. 2. Disconnect spring assembly from actuator slide link. 3. Remove the clevis pin retaining the top of the acutator. 4. Remove slide link and actuator as an assembly by removing the two bolts connecting them to the deck through the bushings. 5.
MAINTENANCE-CIRCUIT PROTECTION 2 1 1. CIRCUIT BREAKERS (BASIC PANEL SHOWN) Circuit breakers interrupt the flow of power in the event of an electrical overload. When a circuit breaker is tripped, reset it by pressing the exposed button. If a circuit breaker continues to trip, the cause of the electrical overload should be found and corrected. 2. FUSE (DELUXE ONLY) The fuse is a one-time circuit protection device designed to stop the flow of electrical current in the event of an electrical overload.
MAINTENANCE-SOLUTION STRAINER & PUMP - DISK MODELS 1 5 2 6 3 4 1. Solution Strainer-Coarse 2. Solution Strainer-Fine 3. Pump 4-19 4. Pump Mounting Plate 5. Solenoid Valve 6.
MAINTENANCE-SOLUTION STRAINER & PUMP-CYLINDRICAL MODELS 1 2 6 1. Solution Strainer-Coarse 2. Solution Strainer-Fine 3. Pump 3 4 5 4. Solenoid Valve 5. Jets 6.
MAINTENANCE-SOLUTION STRAINER & PUMP 1. 3. SOLUTION STRAINER-COARSE Located in bottom of tank. The coarse strainer protects the finer strainer from large debris. If the fine strainer is clean and the pump and solenoid valve are not working, then check the coarse strainer for debris. Drain the solution tank and clean the coarse strainer. To remove the strainer, rotate the strainer counterclockwise. Cleanout the debris from wire mesh and re-assemble. 2.
MAINTENANCE-VACUUM & FLOAT SHUT-OFF 1 2 1. 2.
MAINTENANCE-VACUUM & FLOAT SHUT-OFF RECOVERY TANK FLOAT SHUT-OFF When water is no longer being vacuumed from the floor and the vacuum fan is operating, the ball float has engaged. The vacuum motor will not vacuum water with recovery tank full. The recovery tank must be drained. 1. The float shut-off screen can be cleaned in or out of the machine. 2. To clean the float shut-off while it is inside the machine wipe material off screen then rinse. Check that the ball is also clean and moves freely. 3. 4.
MAINTENANCE-DRIVE MOTOR & BRAKE 1. 2. 3.
MAINTENANCE-DRIVE MOTOR & BRAKE ELECTRIC PARKING BRAKE ENGAGEMENT To disengage brake: FOR SAFETY: Before leaving or servicing machine, stop on a level surface, turn off machine and remove key. Electric Brake Engagement This machine is equipped with an electric parking brake. The brake automatically engages and keeps the machine from moving whenever the operator steps off the platform or when emergency stop is engaged.
MAINTENANCE-DRIVE MOTOR & BRAKE DRIVE MOTOR CARBON BRUSH REPLACEMENT 5. Install new brush and reinstall connecting screw and lead. Do not use a pressure washer to clean around the motors. Use tap pressure only. 6. When all new brushes are installed. Place all in retracted position, held into brush holder by spring tension. FOR SAFETY: Before leaving or servicing machine, stop on a level surface, turn off machine and remove key. 7. Carefully replace brush cap. Reinstalling: 10.
MAINTENANCE-BAG REPLACEMENT REMOVING BAG REPLACING BAG 1. Disconnect batteries and make sure parking brake is not overridden. 1. Install mandrel in bottom of bag. 2. Under left front side of machine loosen hose clamp on recovery dump hose. Do not remove hose. 2. Place new bag in tank making sure hole for strainer basket is oriented properly. 3. Remove Dome and set aside 4. Remove Float cage, loosen screw on elbow and remove elbow. 3. Angle mandrel and bag into tank fitting toward front of machine.
MAINTENANCE-TRANSPORTING PREPARATION FOR LOADING /UNLOADING TRAILER PUSHING MACHINE The machine may be pushed for short distances at speeds not to exceed 5 mph. Be careful to avoid damaging machine. The machine may be pushed by hand from the rear. NOTE: To avoid damage caused by regenerative voltage, disconnect traction motor before towing or pushing machine. MACHINE TIE-DOWNS There are two tie points located at front and each side of foot box frame and two at the front side of frame.
MACHINE TROUBLESHOOTING PROBLEM No power to machine Little or no propel ERROR CODE DELUXE CAUSE Battery disconnected Emergency shut-off activated Check all battery cable connections Reset Battery cables corroded Main fuse blown (Deluxe Only) Clean connections Replace fuse Faulty key switch Replace switch Low battery charge Charge batteries Machine turned on with pedal not in neutral position Allow pedal to return to neutral.
MACHINE TROUBLESHOOTING PROBLEM Vacuum motor does not run, or runs slowly CAUSE ERROR CODE DELUXE Circuit breaker tripped (Basic) Faulty vacuum circuit or switch SOLUTION Reset circuit breaker 7700 Squeegee will not go up/down Faulty circuit or actuator (Deluxe) Faulty cables or pulleys Poor scrubbing performance Debris caught in scrub brushes Check wires, connections and switch Replace brushes, check commutator Check wires, connectors and actuator Repair/replace cables or pulleys Remove debris
MACHINE TROUBLESHOOTING – DELUXE CONTROLLER FAULT CODES ERROR CODE DELUXE PROBLEM None LCD display on, but incomplete 0A01 0204 Power down error Memory corrupt All 080_ codes Throttle wiring All 140 _ Codes All 310_ Codes Possible short circuit of motors, auxiliary outputs (headlight, recycle pump, or backup alarm), wiring or damaged controller 7500 LCD module communications timeout 7501 LCD module settings corrupt All 760_ Codes Brush motor or brush circuit fault All 770_ Codes Vacuum mot
MACHINE TROUBLESHOOTING- CONTROLLER FAULT CODES PROPEL CIRCUIT BOARD TROUBLESHOOTING Curtis 1228 LED DIAGNOSTICS- Basic and Cylindrical During normal operation, with no faults present, the status LED is steadily on. If the controller detects a fault, the status LED provides two types of information. First, it displays a slow flash (2 Hz) or a fast flash (4 Hz) to indicate the severity of the fault. Slow-flash faults are self-clearing; as soon as the fault is corrected, the vehicle will operate normally.
MACHINE TROUBLESHOOTING- CONTROLLER FAULT CODES LED CODE PROGRAMMER LCD DISPLAY EXPLANATION POSSIBLE CAUSE 3,1 PROC/WIRING FAULT HPD fault present for >10 sec. 1. Misadjusted throttle. 2. Broken throttle pot or throttle mechanism. 3,2 BRAKE ON FAULT brake On fault 1. Electromagnetic brake driver shorted. 2. Electromagnetic brake coil open. 3,3 PRECHARGE FAULT precharge fault 1. Low battery voltage. 2. KSI and throttle turned on at same time. 3,4 BRAKE OFF FAULT brake Off fault 1.
PARTS 86037660 CHARIOT 11/09/06
BUMPER 1 2 7 6 8 10 7 10 9 3 11 5 1 4 5-1 86037660 CHARIOT 11/09/06
BUMPER REF 1 2 3 4 5 6 7 8 9 10 11 PART NO. 86276890 86007070 86063230 86063240 86071020 86270830 86010670 86070730 86197040 86279130 86251750 PRV NO. 70752 70849 140813 140814 140783 57023 87029 140729 57264 87083 67602 QTY 6 2 1 1 1 4 4 2 4 4 2 DESCRIPTION SCR, 5/16-18X3/4 PTHMS SS SCR, 5/16-18X1.
CONTROL PANEL-BASIC-CYLINDRICAL 2 7 6 1 8 5 43 42 3 10 41 37 38 9 4 11 40 12 15 44 13 36 17 39 28 28 14 35 15 26 27A 27B 33 45 16 25A 25B 26 18 34 24 22 17 45 19 23 17 22 22 29 30 22 31 46 20 5-3 21 32 17 86037660 CHARIOT 06/25/07
CONTROL PANEL-BASIC-CYLINDRICAL REF PART NO. PRV NO.
CONTROL PANEL-DELUXE 1 3 2 33 4 34 35 1 5 6 36 32 31 8 7 9 21 10 30 11 26A 26B 12 40 37 29 22 25 14 13 28 15 27 38 SUPPLED WITH CONTROLLER 39 24 20 16 18 23 17 18 19 5-5 86037660 CHARIOT 02/21/06
CONTROL PANEL-DELUXE REF PART NO. PRV NO. QTY DESCRIPTION 1 86007520 730142 3 2 86007180 72160 2 SWITCH, EMERGENCY STOP 3 86007190 72161 1 SWITCH KEY DPST 4 86007140 72130 1 SWITCH, SPST 2-POSITION ROCKER 5 86257140 72196 2 SWITCH, RESET PB ROUND 6 86257280 81371 1 SWITCH, PUSH BUTTON 7 86273820 70019 2 SCR, 1/4-20 X 1.25 HHCS 8 86273830 70020 2 SCR, 1/4-20 X 1/2 HHCS SS SERIAL NO.
CONTROL PANEL HOUSING 2 3 3 1 6 5 11 10 4 7 9 8 5-7 86037660 CHARIOT 11/09/06
CONTROL PANEL HOUSING REF 1 2 3 4 5 6 7 8 9 10 11 PART NO. 86005810 86290540 86277480 86070710 86237900 86031730 86070700 86279750 86089650 86277420 86010630 PRV NO. 57245 70850 140726 35278 270084 140725 87252 78524 70841 87013 QTY 4 6 6 1 3 1 1 4 4 4 4 DESCRIPTION NUT, 1/4-20 HEX NYLOCK SS SCR, 10-32 X 1/2 TORX SS BLK NP SCR, 5/16-18 X1/2 PTHMS SS BRKT, LEFT CONSOLE MOUNT GASKET, .125 X .25W X 23L CONSOLE BRKT, RIHGT CONSOLE MOUNT WASHER, RET, PUSHNUT, 5/16 BOLT TUBE, 5/8 OD X .357 ID X 1.
DECAL 4 7 5 3 1 2 9 5-9 86037660 CHARIOT 01/05/09
DECAL REF 1 2 3 4A 4B 5A 5B 6 7 8 PART NO. 86004970 86244740 86244750 86244200 86244180 86244190 86244170 OPEN 86243990 OPEN PRV NO. 50990 501222 501223 500883 500881 500882 500880 QTY 1 1 1 1 1 1 1 DESCRIPTION LABEL, WINDSOR LOGO DOMED DECAL, CHARIOT, ISCRUB RT DECAL, CHARIOT, ISCRUB LT LABEL, PANEL BASIC RIGHT LABEL, PANEL DLX RIGHT LABEL, PANEL BASIC LEFT LABEL, PANEL DLX LEFT 500780 1 LABEL, COVER PANEL 9 86298970 - 1 LABEL, CLEAN BRUSHES AND DECK SERIAL NO.
FRAME-LOWER 2B 1 3 2A 4 5 4 17 6 7 16 8 8 10 9 8 11 8 15 4 4 8 21 13 8 18 22 14 19 20 8 13 12 5-11 4 14 86037660 CHARIOT 03/04/08
FRAME-LOWER REF 1 PART NO. 86070750 PRV NO.
FRAME-UPPER 2 4 3 1 2 2 1 5 3 6 1 3 2 2 SEE SQUEEGE LIFT GROUPS 3 7 5-13 86037660 CHARIOT 11/09/06
FRAME-UPPER REF 1 2 3 4 5 6 7 PART NO. 86010670 86270830 86276070 86091750 86073500 86083080 86277460 PRV NO. 87029 57023 70593 140727 270090 66437 70847 QTY 5 8 7 1 1 1 1 DESCRIPTION WASHER, 5/16 FLAT SS NUT, 5-16-18 HEX NYLOCK SS SCR, 5-16-18 X 3/4 CARRIAGE SS BRKT, HORIZ ELECT BRKT, SIDE CHANNEL L PLATE, VERT BEARING SUPPORT SCR, 5/16-18 X 5/8 BSHCS SS 86037660 CHARIOT 11/09/06 SERIAL NO.
PEDAL PLATFORM 1 2 9 30 28 3 10 4 11 12 5 6 31 8 9 23 22 27 26 25 24 20 10 13 11 12 15 29 14 17 7 16 17 32 18 19 21 20 17 5-15 86037660 CHARIOT 10/04/07
PEDAL PLATFORM REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 PART NO. 86217650 86222700 86216380 86007110 86279720 86272040 86223580 86222520 86277390 86233170 86279730 86277380 86222510 86254970 86222780 86277360 86274340 86224360 86222810 86279140 86288720 86250280 86222790 86278060 86224350 86277370 86221850 86218810 86316310 86264920 86224750 86223260 PRV NO.
PEDAL PLATFORM 2 3 17 16 6 18 6 14 12 19 9 7 20 4 1 8 5 15 11 8 14 13 12 5 11 10 5-17 86037660 CHARIOT 11/09/06
PEDAL PLATFORM REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PART NO. 86277430 86274690 86264920 86231070 86010670 86259430 86010770 86270830 86256470 86005810 86010810 86064480 86286580 86007780 86279760 86259440 86271190 86248920 86278850 86008680 PRV NO. 70843 70258 27049 730328 87029 87485 87143 57023 70852 57245 87191 629993 47479 73576 87256 87486 57142 66487 80613 80607 QTY 1 2 3 2 5 4 2 4 2 1 2 1 1 1 2 2 2 1 2 1 DESCRIPTION SCR, 1/4-20 X 3.00 SHCS SCR, 5/16-18 X 1.
REAR COVER 21 23 18 20 22 18 14 13 1 10 2 3 9 19 18 3 2 11 12 15 16 9 8 7 6 5-19 5 17A 17B 17C 86037660 CHARIOT 04/16/09 4A 4B
REAR COVER REF PART NO. PRV NO.
SCRUB BRUSH/PAD DRIVER 7 5 6 9 4 8 7 5 6 9 4 8 2A 2B 2C 2D 1 5 3 10A 10B 10C 10D 5-21 86037660 CHARIOT 11/09/06
SCRUB BRUSH/PAD DRIVER REF 1 2A 2B 2C 2D 3 4 5 6 7 8 9 10A 10B 10C 10D PART NO. 86000170 86000180 86000190 86000200 86283820 86005070 86276590 86276580 86276600 86007910 86007280 86005940 86283890 86283900 86283910 86283920 PRV NO.
SCRUB DECK – DISK 20 19 19 1 20 2 18 3 FROM PUMP 8 4 8 17 5 16 15 8 9 14 10 11 12 13 5-23 86037660 CHARIOT 05/11/07 6 7
SCRUB DECK – DISK REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 PART NO. 86281100 86003580 86005490 86216200 86004810 86093990 86010790 86276970 86264920 86010600 86003460 86136820 86003420 86279630 86279130 86007020 86279530 86271830 86233150 86004470 86281310 86002830 86264940 PRV NO.
SCRUB DECK – CYLINDRICAL 34 1 2 FROM PUMP 32 3 31 4 25 30 6 8 29 15 16 27 22 25 7 21 9 17 18 19 20 13 33 12 23 24 5-25 5 14 28 26 2 86037660 CHARIOT 08/14/07 10 6 11
SCRUB DECK - CYLINDRICAL REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 PART NO. 86260400 86273750 86233150 86010600 86282330 86010630 86092520 86233270 86033230 86233070 86005810 86277530 86010670 86219440 86279780 86004820 86277870 86279140 86279770 86219450 86228960 86223520 86219290 86217710 86277880 86137310 86279790 86242120 86277150 86222330 86222110 86001360 86218170 86092840 86279130 86264940 PRV NO.
SCRUB DECK AQUA-MIZER™ 16 15 1 14 2 13 17 4 5A 5B 3 6 7 8 9 3 12 11A 11B 10 18 9 5-27 86037660 CHARIOT 11/09/06
SCRUB DECK AQUA-MIZER™ REF 1 2 3 4 5A 5B 6 7 8 9 10 11A 11B 12 13 14 15 16 17 18 PART NO. 86270830 86277050 86276950 86066430 86001540 86283550 86071000 86219690 86277230 86005810 86070990 86001520 86283560 86066420 86272540 86091800 86008670 86091790 86024990 86025000 PRV NO.
SIDE SQUEEGEE – CYLINDRICAL 16 17 6 15 2 10 1 14 7 8 9 13 11 10 12 17 18 4 3 5 20 19 6 9 8 14 10 15 18 11 6 10 21 14 15 13 20 7 15 10 6 10 14 4 22 3 5-29 16 86037660 CHARIOT 11/09/06 1 2
SIDE SQUEEGEE - CYLINDRICAL REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 PART NO. 86066510 86276950 86283480 86277120 86071340 86228990 86271870 86226430 86271170 86010670 86242120 86086570 86079160 86259420 86271840 86272550 86008660 86277130 86091600 86226830 86091570 86071280 PRV NO.
SCRUB DECK - SIDE SQUEEGEE - CYLINDRICAL 2 1 4 8 3 5 6 5-31 7 86037660 CHARIOT 11/09/06
SCRUB DECK - SIDE SQUEEGEE - CYLINDRICAL REF 1 2 3 4 5 6 7 8 PART NO. 86249050 86009200 86008670 86068570 86270830 86071350 86276070 86071440 PRV NO. 82058 81535 80606 140050 57023 140849 70593 140864 QTY 2 2 2 1 4 2 4 1 DESCRIPTION PIN, CLEVIS 3/8 X 3.50 PLTD KNOB, 3/8-16 4 PRONG ALUM COTTER, 3/8” RING BRKT, HOPPER ALIGNMENT NUT, 5/16-18 HEX NYLOCK SS BRKT, SIDE SQG MOUNT 5/16-18 X 3/4 CARRIAGE SS BRKT, SIDE SQUEEGEE, LFT 86037660 CHARIOT 11/09/06 SERIAL NO.
SCRUB DECK SKIRTS 1 2 3 6 4 5 20 5 21 7 8 9 24 10 19 11 18 12 5 23 22 17 16 15 7 14 13 5-33 86037660 CHARIOT 11/09/06
SCRUB DECK SKIRTS REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 PART NO. 86270830 86070960 86276070 86228900 86005810 86276330 86276950 86277410 86271950 86079130 86007650 86007070 86066460 86001560 86091770 86001700 86066480 86091780 86001570 86066470 86277500 86271870 86026470 86026460 PRV NO.
SCRUB DECK LIFT 1 37 36 10 2 8 9 3 4 5 1 6 7 BASIC ONLY SEE DETAIL 'A' 34 13 11 14 39 12 15 16 35 33 17 32 18 31 8 19 22 16 19 23 21 20 28 24 27 26 29 21 19 30 20 22 16 38 25 5-35 86037660 CHARIOT 02/12/07 DETAIL 'A'
SCRUB DECK LIFT REF PART NO. PRV NO. QTY 1 86276950 70772 4 * DESCRIPTION SERIAL NO. FROM NOTES: SCR, 1/4-20 X 3/4 CARRIAGE SS 2 86223270 66482 1 PLUNGER, MICRO SWITCH 3 86276010 70580 2 SCR, 4-40 X 1.
SCRUB DECK MOUNTING- CYLINDRICAL 1 2 2 10 16 17 21 5 20 19 18 2 2 4 7 6 17 23 17 22 8 9 4 22 2 8 17 14 4 5-37 9 3 15 13 12 11 86037660 CHARIOT 04/15/08
SCRUB DECK MOUNTING - CYLINDRICAL REF 1 2 3 4 5 6 7 8 9 10 11 12 PART NO. 86272380 86010770 86087580 86271530 86224380 86232680 86009400 86009050 86008460 86005630 86008810 86005800 PRV NO. 66217 87143 73606 57216 730336 270114 81873 81324 80102 57022 80697 57217 QTY 1 5 2 6 2 REF 1 4 4 2 2 2 DESCRIPTION PIN, CLEVIS 3/8 X .75 PLTD WASHER, 7/16 ID X 1D X .08 FLT SS SPACER, 1/2 OD X .058 ID X .26 LG CRS NUT, 3/8-24 HEX NYLOCK SPACER, 1 OD X .391 ID X 1.
SCRUB DECK ACTUATOR - CYLINDRICAL 1 26 25 24 4 3 7 23 27 28 14 17 20 15 7 12 21 11 10 13 8 9 14 18 15 17 16 14 29 36 31 30 40 30 32 34 1 1 41 33 37 7 2 5-39 38 39 2 22 19 36 5 86037660 CHARIOT 02/10/07 6
SCRUB DECK ACTUATOR - CYLINDRICAL REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 PART NO.
SOLUTION - CYLINDRICAL 14 16 15 13 5 28 7 28 TO SOLENOID 6 9 8 5 24 10 23 22 5 21 12 TO TANK 13 11 25 33 29 30 35 19 32 46 SEE DETAIL 'A' 31 34 13 36 37 47 18 43 5 20 45 38 1 44 17 2 3 5 39 4 42 40 41 DETAIL 'A' 5-41 86037660 CHARIOT 01/03/08
SOLUTION- CYLINDRICAL REF 1 2 3 4 5 6 7 8 9 10 11 PART 86274070 86010650 86233390 86270860 86233150 86270990 86282320 86198050 86240390 86280910 86247760 PRV NO.
SOLUTION - DISK 14 16 15 13 5 28 7 28 TO SOLENOID 6 9 8 5 24 10 23 12 22 5 TO TANK 13 21 11 25 33 29 30 35 19 32 31 SEE DETAIL 'A' 34 13 26 5 27 20 40 1 18 39 2 5 38 3 37 4 36 20 DETAIL 'A' 5-43 86037660 CHARIOT 01/03/08 17
SOLUTION - DISK REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 PART NO.
SQUEEGEE - DISK 1 39 2 38 37 3 9 4 36 40 5 8 35 5 6 7 6 34 8 5 33 9 11 7 10 11 15 12 13 14 15 16 17 18 19A 19B 20 32 30 21 29 22 25 23 24 26 31 27A 27B 28 5-45 86037660 CHARIOT 11/09/06
SQUEEGEE - DISK REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19A 19B 20 21 22 23 24 25 26 27A 27B 28 29 30 31 32 33 34 35 36 37 38 39 40 PART NO.
SQUEEGEE - CYLINDRICAL 1 2 39 3 6 5 4 7 37 6 38 7 36 8 35 9 34 12 10 4 11 33 4 32 13 31 42 30 17 16 28 18 26 19 27 29 20 27 25 21 24 23 5-47 86037660 CHARIOT 02/20/07 22A 22B 15 14A 14B
SQUEEGEE - CYLINDRICAL REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14A 14B 15 16 17 18 19 20 21 22A 22B 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 PART NO.
SQUEEGEE LIFT-BASIC 29 30 27 3 9 3 5 4 26 4 3 31 4 32 4 28 24 3 23 3 4 14 3 17 18 19 20 21 4 22 4 10 9 4 16 4 2 15 9 3 25 35 4 1 14 13 37 12 36 4 34 4 6 10 38 11 3 33 8 9 5 3 7 5-49 3 5 86037660 CHARIOT 08/14/07
SQUEEGEE LIFT-BASIC REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 PART NO. 86277490 86259420 86010670 86270830 86276760 86277460 86274720 86083490 86231150 86223370 86083500 86270920 86257120 86226630 86076610 86238360 86083360 86232670 86073890 86231560 86279350 86091820 86276070 86066130 86295860 86254280 86083350 86270870 86254580 86277410 86277400 86083340 86083440 86276070 86007020 86278980 86279450 86073600 PRV NO.
SQUEEGEE LIFT-DELUXE 1 28 2 3 30 5 1 2 28 2 28 25 5 13 3 10 20 13 13 2 10 10 6 11 12 8 28 9 7 29 16 14 27 22 13 10 17 17 18 13 19 21 11 16 10 23 13 26 10 24 16 4 17 13 20 10 5-51 16 86037660 CHARIOT 05/26/09
SQUEEGEE LIFT-DELUXE REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 PART NO. 86068190 86273820 86316550 86083490 86068230 86270870 86002780 86277410 86075430 86270830 86276070 86277400 86010670 86277460 86259420 86223370 86231150 86083440 86276760 86274720 86071300 86224290 86071310 86083500 86271840 86074160 86277480 86271870 86228880 86326650 PRV NO.
SQUEEGEE SWING 1 1 24 23 27 22 6 21 2 20 7 26 3 4 6 19 18 25 5 16 6 15 17 14 7 13 6 12 11 10 6 5-53 9 8 86037660 CHARIOT 05/08/09
SQUEEGEE SWING REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 PART NO. 86276690 86091530 86090300 86083370 86091540 86270830 86271530 86008810 86271980 86223590 86001320 86091810 86224290 86083400 86276760 86272630 86008650 86228840 86277030 86224380 86083150 86083310 86226030 86222580 86070820 86278910 86326670 PRV NO.
SQUEEGEE LIFT - CYLINDRICAL 1 16 17 8 2 15 4 7 18 10 11 3 4 5 6 7 5 12 9 7 8 13 14 8 5-55 86037660 CHARIOT 11/09/06
SQUEEGEE LIFT - CYLINDRICAL REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 PART NO. 86276690 86276990 86224370 86228840 86259420 86071160 86010670 86270830 86007020 86007270 86278910 86094270 86004890 86224290 86277030 86009560 86010630 86008650 PRV NO. 70715 70776 730335 09124 87232 140819 87029 57023 70673 730006 87003 730344 48095 730008 70780 82053 87013 80604 QTY 4 1 4 6 8 1 7 7 1 1 1 1 1 1 2 1 1 1 DESCRIPTION SCR, 5/16-18 X 1.75 CARR SS SCR, 3/8-16 X 3.5 CARRIAGE SS SPACER, 1 OD X .391 ID X .
SQUEEGEE LIFT - CYLINDRICAL 1 6 2 3 33 7 4 8 9 5 10 11 12 13 15 14 16 15 17 18 12 19 11 15 17 17 32 11 12 11 13 15 21 22 12 34 20 27 24 28 23 30 16 25 11 29 11 15 26 5-57 15 86037660 CHARIOT 08/14/07 15 31
SQUEEGEE LIFT - CYLINDRICAL REF PART NO. PRV NO. QTY DESCRIPTION 1 86238360 36215 1 GRIP, 3/16 X 1.0 ORANGE 2 86076610 38319 1 HANDLE, SQUEEGEE LIFT 3 86257120 72192 1 SWITCH, DPST SNAP ACTION 4 86008650 80604 1 COTTER, 1/4” RING 5 86279450 87161 2 WASHER, #6 FLAT SAE PLTD 6 86275550 70500 2 SCR, #6-32 X 1.25 PPHMS 7 86259420 87232 2 WASHER, THRUST .51 ID X 1 OD BRO 8 86009560 82053 1 PIN, CLEVIS 1/4 X .
STEERING 1 2 3 4 5 6 8 7 28 9 10 11 12 13 27 26 25 14 15 24 14 19 29 23 22 21 20 19 18 16 17 7 5-59 86037660 CHARIOT 11/09/06
STEERING REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 - PART NO. 86271610 86234810 86259610 86224050 86228790 86091740 86270830 86005610 86219600 86272900 86224060 86219650 86228670 86276070 86224800 86010670 86135970 86275190 86008610 86001030 86224320 86224810 86005630 86002750 86278940 86010780 86274330 86279130 86253200 86232780 PRV NO.
TANK 5 3 4 32 2 1 6 7 37 11 22 19 8 9 23 20 31 21A 21B 17 11 35 11 12 10 36 27 14 29 13 15 16 34 33 18 26 24 25 29 30 27 5-61 86037660 CHARIOT 12/12/08 28
TANK REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21A 21B 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 PART NO. 86001510 86006470 86221900 86271940 86010630 86006480 86246080 86004010 86003350 86310190 86006860 86276840 86256100 86275800 86002620 86004000 86033570 86002390 86003010 86264950 86305960 86004380 86197870 86003680 86311740 86004430 86002380 86032870 86006760 86177050 86279630 86257570 86310180 86003710 86004440 86277560 86025200 86199840 98406760 PRV NO.
VACUUM 15 14 10 9 11 8 7 6 12 4 5 12 5-63 3 86037660 CHARIOT 11/09/06 13
VACUUM REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 PART NO. 86270990 86083030 86083010 86270830 86083020 86005500 86135310 86237880 86237890 86078650 86238040 86064740 86274070 86270860 86236530 86236540 PRV NO.
WHEEL-FRONT DRIVE, CHAIN 1 2 3 4 9 9 5 20 18 17 33 8 32 9 10 11 12 6 7 31 13 14 30A 30B 29 28 15 27 17 26 18 17 25 22 1 35 23 24 18 21 14 5-65 16 86037660 CHARIOT 08/19/09 15 19
WHEEL-FRONT DRIVE, CHAIN REF PART NO. PRV NO.
WHEEL-FRONT DRIVE, GEAR 1 2 5 6 7 3 8 4 9 21 20 19 11 10A 10B 12 13 14 16 18 5-67 15 17 86037660 CHARIOT 02/21/09 22
WHEEL-FRONT DRIVE, GEAR REF 1 2 3 4 5 6 7 8 9 10A 10B 11 12 13 14 15 16 17 18 19 20 21 PART NO. 86275190 86010790 86002830 86006170 86223980 86219420 86223480 86224020 86317190 86011120 86259920 86224440 86222720 86225810 86279710 86136640 86222770 86279690 86277340 86223980 86318830 86222760 PRV NO. 70377 87163 27196 66031 09134 41510 67450 730233 89262 89273 730387 620037 87506 87245 70262 620042 87243 70830 09134 620041 QTY 4 4 1 1 3 1 2 1 1 1 1 1 1 1 1 1 1 4 4 3 10 1 DESCRIPTION SCR, 3/8-16 X 1.
WHEEL-FRONT BRAKE 1 2 20 3 19 18 16 17 14 15 10 11 13 12 4 21 7 8 6 9 5-69 86037660 CHARIOT 02/21/09 5
WHEEL-FRONT BRAKE REF PART NO. PRV NO.
WHEEL-REAR 1A 1B 2 3 5-71 86037660 CHARIOT 04/07/07
WHEEL-REAR REF 1A 1B PART NO. 86011110 86259930 PRV NO. 89261 89274 QTY 2 - 2 3 86008710 86232130 80623 17309 2 2 DESCRIPTION WHEEL, 10X2.5X.787ID BEARINGS WHEEL, 10X2.5, W/BEARINGS, GRY RING, ¾” EXT SNAP H-D CAP, 2.75 ID X 1.0 L BLK VINYL 86037660 CHARIOT 04/07/07 SERIAL NO.
WIRING-BATTERIES 2 3 4 1A 1B 20A 20B 20C 5 9 24 25 23 7A 7B 6A 6B 10 11 26 8 12 22 13 14 15 16 19 17 18 5-73 86037660 CHARIOT 02/20/07
WIRING-BATTERIES REF 1A 1B 2 3 4 5 6A 6B 7A 7B 8 9 10 11 12 13 14 15 16 17 18 19 20A 20B 20C 21A 21B 22 23 24 25 26 PART NO. 86260200 86002510 86008920 86271910 86010670 86264960 86260610 86002570 86260230 86002580 86008760 86229700 86008300 86008410 86272810 86092910 86254990 86278150 86259910 86088790 86276070 86270830 86228410 86283410 86228430 86284090 86000150 86005810 86233360 86273980 86010650 86270890 PRV NO.
WIRING-COMPONENTS 2 1 3 4 6 4 5 7 8 9 10 11 13 12 5-75 86037660 CHARIOT 02/03/09
WIRING-COMPONENTS REF 1 2 3 4 5 6 7 8 9 10 11 12 13 PART NO. 86010780 86273830 86255910 86005710 86010630 86006850 86008920 86238500 86276070 86239720 86233410 86270830 86010670 PRV NO. 87162 70020 73659 57105 87013 70393 80889 81427 70593 41520 81270 57023 87029 QTY 2 2 2 4 2 2 2 1 1 1 1 1 1 DESCRIPTION WASHER, 1/4 SPLIT LOCK PLTD SCR, 1/4-20 X 1/2 HHCS SS NP STANDOFF, 1/4-20 X 1.0 HEX INS NUT, 1/4-20 HEX W/STAR WASHER WASHER, 1/4 ID X 5/8 OD SS SET SCR, 1/4-20 1.25L BOOT, RUBBER TERM.
WIRING-CONTROL PANEL-BASIC-CYLINDRICAL 41 BLK 40 RED 32 RED 42 BLK 30 GRN 12 ORG E F G 30A-BASIC 25A CYLINDRICAL 52 RED 2 BLK 1 WHT 10 RED 10 RED 18A 10 RED 18A 10 RED 35 RED 3A 34 RED 53 RED 3 LT BLU M 4 25 GRN 24 YLW 14 WHT/RED 6 RED 24 YLW 26 GRN 3A 14 WHT/RED 30A 6 RED 27 GRN 49 LT BLU 12 ORG B C D 35 RED 50 ORG 48 BLK 42 BLK 63 BLK 45 WHT 44 WHT 20 WHT 43 RED 6 BRN 9 BRN 47 RED 22 RED 22 RED 23 BLK 23 BLK 18 LT BLU 29 BLU 47 RED 46 RED 58 BLK 17 WHT/YLW 28 GRY 33
WIRING-CONTROL PANEL- BASIC - CYLINDRICAL REF 1 2 3 4 5 6 7 PART NO. 86239140 86260540 86010860 86261210 86261250 86251490 86311210 PRV NO. 41524 880426 880353 29204 29273 67619 - QTY 1 1 1 3 1 1 1 DESCRIPTION HARNESS, CONTROL PANEL BASIC WIRE, 4X13 RD C.TERM X 5/16RING WIRE, 4X20 BK CTERM X5/16RING DIODE ASM, 76008, 76008 DIODE ASM, FAST RECOVERY RESISTOR ASM, 1/2 WATT 33 OHM LIGHT ASM, INDICATOR, CODE SERIAL NO.
WIRING-CONTROL PANEL-DELUXE 5-79 86037660 CHARIOT 03/03/09
WIRING-CONTROL PANEL-DELUXE REF 1 2 3 4 PART NO. 86260560 86260550 86260570 86239150 PRV NO. 880428 880427 880429 41525 QTY 1 1 1 1 5 86235780 34164 2 DESCRIPTION WIRE, 4X10RD 5/16RING X 5/16RING WIRE, 4X15BK C. TERM X 5/16 RING WIRE, 4X8RD C. TERM X 5/16RING HARNESS, CONTROL PANEL DELUXE FERRITE CLAMP, 1.14 X 1.28 X .583 86037660 CHARIOT 01/18/08 SERIAL NO.
WIRING- DRIVE MOTOR RED BLK 1 WHT 2 BLK 1 2 BLK 1 WHT 2 BLK WHT BLK CONTROL PANEL HARNESS 5-81 86037660 CHARIOT 11/09/06
WIRING-DRIVE MOTOR REF 1 PART NO. 86239120 PRV NO. 41522 QTY 1 DESCRIPTION HARNESS, CHARIOT PROPEL 86037660 CHARIOT 11/09/06 SERIAL NO.
WIRING-MAIN HARNESS DIAGRAM A HORN 13 ORG 12 ORG 17 WHT/YLW 20 BLK 6 BRN 22 WHT/BLK 16 BLK 14 BLK 19 WHT BRAKE 20 BLK DRIVE MOTOR 6 BRN 6 BRN SOLENOID VALVE 1 11 RED DIAGRAM B 59 WHT/ORG 16 BLK 60 WHT/BLK 15 YLW SWITCH BRUSH MOTOR (BASIC ONLY) 10 BLK 13 BLK 18 LG BLU 19 WHT 6 BRN 21 WHT/ORG 15 YLW 12 RED 5 RIGHT BRUSH MOTOR LEFT BRUSH MOTOR PUMP 9 BLK 2 DIAGRAM C 17 LT BLU 18 WHT/YLW SCRUB LIFT ACTUATOR CONTROL HARNESS 11 RED 3 59 WHT/ORG 60 WHT/BLK VAC MOTOR 10 BLK CONTR
WIRING-MAIN HARNESS REF 1 2 3 4 5 PART NO. 86239170 86239130 86239160 86239110 86235820 PRV NO. 41528 41523 41527 41521 34376 QTY 1 1 1 1 1 DESCRIPTION HARNESS, BRAKE HARNESS, MAIN HARNESS, DECK SWITCH HARNESS, VAC BASIC FERRITE, .72 X .70 X 1.28 86037660 CHARIOT 11/09/06 SERIAL NO.
WIRING-PEDAL PLATFORM B A 1 BRN BLU BRN RED DIAGRAM A DIAGRAM B 5 ORG 6 BRN 7 GRN 5 GRN 10 BRN 6 ORG 3 LT BLU 4 RED 5-85 5-65 86037660 CHARIOT 11/09/06
WIRING-PEDAL PLATFORM REF 1 PART NO. 86218810 PRV NO. 23717 QTY 1 DESCRIPTION HARNESS, TWISTER PEDAL 86037660 CHARIOT 11/09/06 SERIAL NO.
5-87 BLK 21/LT-BLU 51/RED 9/RED 34/RED 86310910 BRUSH RELAY 52/RED SOLUTION CONTROL BOARD 39/BLK 33/RED WHT WHT INDICATES OPTIONAL EQUIPMENT INDICATES WIRING NOT IN HARNESS 86037660 CHARIOT 07/30/08 32/RED 32/RED 36/RED 61/RED SHUNT 38/BLK 6/BRN 6/BRN 42/BLK 63/BLK 34/RED 35/RED 3/LT-BLUE 53/RED 20/WHT 52/RED 47/RED 15/YLW 14/WHT-RED 50/ORG AMP METER 40/BLK SPEED SWITCH 30/GRN TRACTION 26/GRN 27/GRN 48/BLK RUN/RESET RELAY 36/RED KEY SWITCH RESET SWITCH 19/WHT-BLK 44/WHT 4
WIRING DIAGRAM-DELUXE OPERATOR PLATFORM SOLENOID PLATFORM SWITCH RBRUSH BRAKE SWITCH BRAKE VACUUM 1 LBRUSH BLU RED OPERATOR PRESENCE SWITCH DECK LIFT SQUEGEE SOLUTION ACTUATOR ACTUATOR PUMP BRN FLASHER UNIT ORG BRN GRN 4 PIN DEUTSCH TRACTION 2 PIN PACKARD 12 PIN DEUTSCH 10/BLK 12/RED 7/GRN 9/RED 5/ORG 58/BLU 4/RED 16/LT BLU 17/WHT-YLW 19/WHT-BLK 18/WHT-ORG 14/WHT-RED 15/YLW 20/WHT 63/BLK 6/BRN 6/BRN 13/BLK 12/ORG 57/WHT 8/BLK 6/BRN 2/BLK 6 PIN DEUTSCH 38/BLK 37/BLU 26/RED 25/BLK 3
86282190 (13") PRV 39616 DRAIN HOSE 86004310 (18") PRV 39505 HOSE DIAGRAM - DISK TANK SHUT-OFF VALVE 80 MESH (FINE) STRAINER 86281950 (32") PRV 39541 SOLENOID VALVE 86281100 (8") PRV 39274 86281310 (8") PRV 39326 86281310 (8") PRV 39326 86281940 (40") PRV 39540 PUMP 12 MESH (COARSE) STAINER SCRUB DECK 5-89 86037660 CHARIOT 01/03/08
DRAIN HOSE 86004310 (18") PRV 39505 HOSE DIAGRAM - CYLINDRICAL SHUT-OFF VALVE 12 MESH (COARSE) STAINER 86281940 (40") PRV 39540 86282370 (58") PRV 39735 80 MESH (FINE) STRAINER PUMP 86282360 (28") PRV 39734 TANK PRV 39282 SOLENOID VALVE 86281100 PRV 39274 86037660 CHARIOT 01/03/08 5-90
SUGGESTED SPARE PARTS PART NO. 86001910 86001920 86002000 86002010 86232130 86003680 86004010 86305960 86004860 86004890 86006340 86251410 86007140 86007170 86007190 86007240 86008790 86009200 86009700 86069880 86001510 86001520 86001540 86001560 86001570 86001580 86001630 86001700 86001730 86001740 86002730 86231560 86002780 86007940 PRV NO.
OPTIONS
BACK-UP ALARM - OPTION 3 1 2 4 6-1 86037660 CHARIOT 11/09/06
BACK-UP ALARM - OPTION REF 1 2 3 4 PART NO. 86071140 86231500 86276780 86271840 PRV NO. 140817 80882 70728 57285 QTY 1 1 1 1 DESCRIPTION BRKT, BACK UP ALARM BUZZER, PIEZO 6-28VCD SCR, 5/16-18 X 3/4 HHCS SS NUT, 5/16-18 HEX NYLOCK THN SS 86037660 CHARIOT 11/09/06 SERIAL NO.
BATTERY CART - OPTION 27 26 28 3 30 5 24 3 8 9 29 25 2 6 1 2 15 3 4 3 23 3 22 5 10 5 3 3 6 9 8 7 13 12 5 3 14 20 11 21 19 16 15 18 17 6-3 31 3 86037660 CHARIOT 09/17/09 3
BATTERY CART - OPTION REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 PART NO. 86006930 86254290 86270830 86077010 86010670 86228840 86259410 86259400 86254890 86068490 86231090 86083120 86076600 86004070 86276790 86276690 86199430 86078890 86277130 86007020 86232590 86001350 86011020 86271840 86008130 86274730 86070790 86087340 86070800 86271870 86276070 PRV NO.
BATTERY CART - OPTION 1 2 4 5 3 7 7 5 6 10 3 6 17 3 8 9 10 11 12 13 14 15 6 10 10 3 16 6-5 86037660 CHARIOT 11/09/06 3
BATTERY CART - OPTION REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 PART NO. 86078330 86276070 86270830 86087800 86228840 86259410 86006560 86077140 86226830 86010670 86244280 86276060 86254280 86231150 86259400 86276690 86077530 PRV NO.
SEAT - OPTION 2 13 14 1 12 11 3 4 5 6 10 9 8 7 15 16 17 18 19 20 23 24 22 21 6-7 86037660 CHARIOT 11/09/06
SEAT - OPTION REF 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 PART NO. 86248390 86082640 86276890 86279460 86270710 86271930 86278910 86070830 86070840 86277710 86008650 86246320 86272300 86251860 86279620 86276070 86277510 86009200 86254300 86094000 86276710 86093790 86010670 86270830 PRV NO.
WARNING LIGHTS - OPTION 1 6 2 3 3 4 FRONT 5 7 3 1 2 6 6-9 REAR 86037660 CHARIOT 11/09/06
WARNING LIGHTS - OPTION REF 1 2 3 4 5 6 7 PART NO. 86270990 86010650 86276820 86071490 86270990 86246200 86071500 PRV NO. 57090 87018 70740 140871 57090 51454 140872 QTY 4 4 4 1 2 2 1 DESCRIPTION NUT, 10-32 HEX NYLOCK SS WASHER, #10 X 6/16 OD SCR, 10-32 X 1/2 PTHMS BLK BRKT, UPPER WARNING LIGHT NUT, 10-32 HEX NYLOCK SS LED AMBER LIGHT, 12V BRKT, LOWER WARNING LIGHT 86037660 CHARIOT 11/09/06 SERIAL NO.
6-11 86037660 CHARIOT 11/09/06
86037660 CHARIOT 11/09/06 6-12
6-13 86037660 CHARIOT 11/09/06
SERIAL NUMBERS REF. NO.
